Wurth Elektronik WE-EPLE Series, Right Angle Through Hole, Version 2.0 Type A USB Connector, Receptacle

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Wurth Electronik WE-EPLE 2.0 USB Type A PCB Connector with Integrated EMI & ESD Protection

A USB 2.0 Type A PCB through hole mount jack connector with integrated EMI & ESD protection and a high data speed of up to 480 MBit/s. This USB 2.0 type A PCB jack features ESD protection of data channels and VDD, common mode noise reduction and VDD differential mode noise rejection. Additional benefits of this Type A USB jack include an ultra-low capacitance and a fast turn on and low clamping voltage. The compact design of this Type A USB connector enables it to be used in applications where space is limited and is fully compatible with standard through hole type 2.0 USB jacks

Wurth USB 3.0 PCB Connectors and Cable Assemblies

The WR-COM connector series from Wurth is one of the first USB 3.0 connectors in the market that complies with specifications of the USB Implementers Forum. The USB 3.0 architecture allows transmission speeds up to 5 Gbits/s which are 10x faster than the previous standard. This USB 3.0 dual-bus architecture is both backwards and forward compatible (USB 3.0 devise in a 2.0 port). The benefits of using USB 3.0 are reduced transmission times and power consumption. The USB 3.0 ports are characterised by their Blue colour and will physically accept 2.0 hardware despite having more pins.

Specifications
Attribute Value
Gender Female
Mounting Type Through Hole
Termination Method Solder
USB Version 2.0
Body Orientation Right Angle
Number of Ports 1
Current Rating 1A
Voltage Rating 5 V dc
Series WE-EPLE
Contact Material Phosphor Bronze
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
18 In stock for delivery within 3 working days
Price Each
HK$ 70.35
(exc. GST)
units
Per unit
1 - 1
HK$70.35
2 - 4
HK$66.97
5 - 9
HK$63.98
10 - 19
HK$61.72
20 +
HK$57.53
Related Products
The EPDM, Ethylene Propylene sponge is sulphur cured. ...
Description:
The EPDM, Ethylene Propylene sponge is sulphur cured. TECHNICAL PROPERTIES:Hardness (solid) ASTM D2240 60 Shore ASpecific Gravity (Solid) BS ISO 2781:2008 1.18 g/cm3Specific Gravity (Sponge) BS ISO 2781:2008 0.61 g/cm3Mooney Viscosity (ML 1+4 @ 1000C BS ISO 289-1:2005 58 MooneyMooney ...
Water Byelaws Listed Grade EPDM rubber may be ...
Description:
Water Byelaws Listed Grade EPDM rubber may be used in all applications involving cold potable water useExcellent resistance to weatheringTemperature Range -40 → +100 °C.
Chemical gradeGood resistance to mineral oils, fuels, non-polar ...
Description:
Chemical gradeGood resistance to mineral oils, fuels, non-polar solvents, including high aromatic and chlorinated typesTemp. Range -18°C - +204°CSheet size 600 x 600mm.
Full face gasket sheets manufactured from Aramid fibres ...
Description:
Full face gasket sheets manufactured from Aramid fibres with a nitrile rubber binding. Available to fit BS10 table A and ASME BS16.21 flanges and with BST ’E and ASA 150 pressure ratings. 3XA anti-stick coating on both faces aids installation. ...