Infineon, TDB6HK95N16LOFHOSA1, Thyristor Module, IGBT, 95A 1600V, 14-Pin ISOPACK

  • RS Stock No. 165-5554
  • Mfr. Part No. TDB6HK95N16LOFHOSA1
  • Manufacturer Infineon
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Half Controlled Bridge Modules, TDB6HK Series, Infineon

The Infineon Thyristor modules vary in configuration, offering half controlled bridges, half controlled bridge with NTC and half controlled bridge with Chopper (IGBT) and NTC (negative temperature coefficient) temperature sensor. They cover 1600 volts and current ranges from 95A to 360 Amps. The modules will differ in the standard Industry housing from EconoBRIDGE™ and IsoPACK™. Typical applications may be an active rectifier and a half controlled B6 bridge.

Isolated copper base plate
Integrated NTC temperature sensor
RoHS compliant
Compact Standard Housing
Solder Contact Technology / PressFIT Contact Technology
IsoPACK Modules with screwable power terminals
IsoPACK version is designed for replacing 3 x 20mm SCR / diode half bridge module

Thyristors - Infineon

The Infineon Phase Control Thyristors (PCT) offer different types of thyristors such as the capsule version, thyristor module and the combination PowerBLOCK thyristor/ diode module. The thyristor module style comes with a stable pressure contact which uses an isolated copper base plate in a range of sizes up to 60mm.

Specifications
Attribute Value
Thyristor Type IGBT
Maximum Gate Trigger Voltage 2.5V
Maximum Gate Trigger Current 150mA
Maximum Holding Current 200mA
Rated Average On-State Current 95A
Repetitive Peak Reverse Voltage 1600V
Surge Current Rating 720A
Mounting Type Panel Mount
Package Type ISOPACK
Pin Count 14
Peak On-State Voltage 1.64V
Repetitive Peak Forward Blocking Voltage 1600V
Repetitive Peak Off-State Current 8mA
Dimensions 94 x 54 x 30mm
Minimum Operating Temperature -40 °C
Width 54mm
Height 30mm
Maximum Operating Temperature +125 °C
Length 94mm
6 In stock for delivery within 3 working days
Price Each (In a Tray of 3)
Was HK$1,859.667
HK$ 1,393.363
(exc. GST)
units
Per unit
Per Tray*
3 +
HK$1,393.363
HK$4,180.089
*price indicative
Related Products
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Glenair full nelson heatshrink boots (LSZH), series 77 ...
Description:
Glenair full nelson heatshrink boots (LSZH), series 77 type 2 for regulated environmental safety applications meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These LSZH semi rigid polyolefin heat shrink boots fit most standard heatshrink boot ...
Glenair full nelson lipless heatshrink boots, zero halogen, ...
Description:
Glenair full nelson lipless heatshrink boots, zero halogen, series 77 type 2 meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These halogen free polyolefin heat shrink boots have good resistance to oils, fuels and solvents and ...