TE Connectivity LR1 Series Axial Metal Film Resistor 330Ω ±1% 0.6W ±50ppm/°C

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

0.6W LR1F Series 10R - 1M0, Axial

The LR1F series resistors from TE Connectivity are axial resistors featuring a superior quality metal film with 1% tolerance and a temperature coefficient down to 50 ppm. Ideally suited where low resistance and small sizes are required, the resistive element comprises a thin film of nickel-chrome alloy evaporated onto a high thermal conductivity ceramic element.

Metal film resistors have excellent stability under load and severe environmental conditions. The LR1F series are suitable for both general purpose applications as well as those precision applications in industry.

Metal Film Fixed Resistors, LR Series
Superior quality metal film resistors with 1% tolerance and temperature coefficients down to 50 ppm
3 case sizes are available in 0.25, 0.6, 0.75W.
The LR1L series is a low Ohmic value range from 0.1 to 0.82 ohm.
Ideally suited where low resistance and small size are required
Metal film resistors have excellent stability under load and severe environmental conditions
They exhibit very low noise current and voltage coefficients
They are available in a wide range of resistance values and are suitable
for general purpose and precision applications

Power at 70°C 0.6W
Resistance Tolerance ±1%
Temperature Coefficient ±50ppm/°C
Operating Temperature -55°C → +155°C
Limiting Element Voltage 350Vdc
Insulating Resistance 1000 MΩ
Overload Voltage 700Vdc (Max.)
Dielectric Strength 700Vdc
Body Length 6.2 mm
Body Diameter 2.3 mm
Lead Length 25 mm
Lead Diameter 0.55 mm

Note

This series of resistors is now rated at 0.6W (commercial spec) and 0.25W (CECC military spec).

Specifications
Attribute Value
Resistance 330 Ω
Power Rating 0.6W
Tolerance ±1%
Technology Metal Film
Series LR1
Minimum Operating Temperature -55°C
Maximum Operating Temperature +155°C
6160 In stock for delivery within 3 working days
Price Each (In a Bag of 20)
HK$ 0.293
(exc. GST)
units
Per unit
Per Bag*
20 - 180
HK$0.293
HK$5.86
200 - 480
HK$0.26
HK$5.20
500 - 980
HK$0.211
HK$4.22
1000 - 1980
HK$0.185
HK$3.70
2000 +
HK$0.169
HK$3.38
*price indicative
Packaging Options:
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operationDuty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulatingCan be ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
Stego high performance cartridge heaters prevent the formation ...
Description:
Stego high performance cartridge heaters prevent the formation of condensation and provide an evenly distributed interior air temperature in enclosures. Heating element: high performance cartridgeOverheat protection: built-in temperature limiterHeater body: die-cast aluminum, glass bead finishConnection: 3-pole ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.