1:1 Surface Mount Flyback Transformer, 8μH, 0.015Ω

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Wurth Flyback Transformers

Designed specifically for DC-DC convertors and offline PWM switching regulators
The transformer is much smaller than a normal mains transformer for the same power rating due to the high operating frequency

Specifications
Attribute Value
Primary Inductance 8µH
Primary DC Resistance 0.015Ω
Secondary DC Resistance 0.02Ω
Turns Ratio 1:1
Mounting Type Surface Mount
Leakage Inductance 400nH
Dimensions 32.31 x 27.03 x 13.69mm
Depth 13.69mm
Length 32.31mm
Width 27.03mm
Maximum Temperature +85°C
Minimum Temperature -40°C
Secondary Voltage Rating 10 V, 24 V
Isolation Voltage 2.5kV
Primary Voltage Rating 20 → 48V
Power Rating 45W
On back order for despatch 22/10/2020, delivery within 3 working days
Price Each (On a Reel of 100)
HK$ 93.87
(exc. GST)
units
Per unit
Per Reel*
100 +
HK$93.87
HK$9,387.00
*price indicative
Related Products
A range of standard feed through DIN Rail ...
Description:
A range of standard feed through DIN Rail terminals with an easy to operate screw connection mechanism that can connect solid and flexible wires, with or without wire-end ferrules. The pluggable insulated cross connection system allows for time saving and ...
WWK 2,5-3 D/U /V0 Initiator terminal block with ...
Description:
WWK 2,5-3 D/U /V0 Initiator terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 2.5 sq.mm, width 6 mm, colour gray. (See RS Stock No. 865-1340)WK 2,5-3 D SL /V0 Initiator terminal block ...
Screw connection DIN rail mounted earth terminal blocksVery ...
Description:
Screw connection DIN rail mounted earth terminal blocksVery low contact resistanceGreen/yellow earth colour codingSuitable for a wide range of cross-section and wire typesWires can be connected without any special preparationVibration proof connectionHigh reliability and maintenance freeEasy mounting and ...
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 ...
Description:
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 Anti rotation spigot IP20 finger protection Cable entry 10mm sq (3x1.5mm sq or 2x2.5mm sq)Supplied complete with earth screw and washer.