Phoenix Contact Solid State Relay, Through Hole, 6 V dc Control

PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers to a 15 way D-SUB cable.

Relays and opto-couplers for inputs and outputs with "pluggable" switching devices
Four bridging slots to reduce wiring; bridging of up to 80 modules is possible
Screw terminal connections
LED indicators and diodes for coil suppression
250V versions have a switched power rating of 1500VA
Dimensions (WxDxH) 6.2 x 80 x 94 mm (Single pole, double pole 14mm wide)
Operating temperature range -40 to +55°C
Mechanical life (relays) 1 x 10⁷ operations
Wide range of accessories also available

Control the opening and closing of electrical circuits on a printed circuit board (PCB) with this relay from Phoenix Contact. Its four bridging slots let you bridge up to 80 modules.
To save on space, the hard-wearing unit can be tightly packed in rows together with other relays and optocouplers of the same profile. Its spring-cage, push-in terminals easily accept even very small conductors without the need for tools. The relay's user-friendly wiring system needs low insertion force. You can remove the conductors easily with a simple push on the release button.
As this relay is resistant to shock and vibration, it's a good choice for use with electrical circuit boards in industrial machinery and equipment. It's components are also washproof, so you can clean it without worries. This unit meets EN 50178 standards, meaning it's safe to use in power installation applications.

• Dimensions of 28 (H) x 5 (W) x 15 mm (D)
• Isolation voltage of 2.5 kV
• Maximum forward voltage of 5 V
• Maximum input current of 9 mA
• Operating temperature range of -25°C to +60°C
• DIN rail mount type