Pluto 2TLA Series Safety Controller, 24 Safety Inputs, 6 Safety Outputs, 24 V dc

  • RS Stock No. 733-4820
  • Mfr. Part No. 2TLA020070R1700
  • Manufacturer ABB
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Simple and easy programming facilities
Easy to configure and install
Up to 640 I/O's
Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
High safety level
Free software available
Programming over the bus
35 mm DIN rail mounting
The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment

Note

The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)

Approvals

TUV, FS, CSA

ABB Safety PLC

The ABB Pluto 2TLA series safety controller is an 'all-master' safety PLC device. This simplifies safety systems for its consumers and achieves the highest safety category of 4, according to EN 954-1. All Pluto’s are master units and can see the other Pluto’s inputs, outputs, and global memories. This enables the Pluto to evaluate the information from the other Pluto's and take appropriate decisions concerning its own safety devices. The gateway units are available for several different bus systems. Most of the modules in this family have dual safety outputs, potential free or PNP types. Up to 32 Pluto units can be safely connected in a 2-wire bus system to communicate with a superior system via a gateway or HMI displays. Therefore, within a maximum extended system 1472, I/O's can be connected. Also, all input components may be connected in series for even more complexity and optimisation.

The IDFIX is an identification circuit that allows multiple Pluto’s to be identified when connected on a bus system. This module is available to distribute a Tina adapter such as can be used to connect external safety monitoring equipment.

Note
The IDFIX device is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however, the absence of an IDFIX requires to be stated when programming the Pluto device.)

Features and Benefits

• 24 safety inputs and 6 safety outputs
• Simple and easy programming facilities
• Easy to configure and install
• Up to 640I/O's
• High safety level
• Free software available
• Programming over the bus
• 35mm DIN rail mounting
• PLC program within a network of Pluto devices

Certifications

• TUV certified
• FS certified
• CSA certified

Specifications
Attribute Value
Range Pluto
Series 2TLA
Number of I/O 46
Number of Safety Inputs 24
Number of Safety Outputs 6
Safety Category 4
SIL SIL 3
Supply Voltage 24 V dc
Contact Current Rating 1.5 A
Contact Voltage Rating 50 V dc, 250 V ac
IP Rating IP20, IP40
Depth 118mm
Length 84mm
Dimensions 84 x 90 x 118 mm
Width 90mm
4 In stock for delivery within 3 working days
Price Each
HK$ 10,710.00
(exc. GST)
units
Per unit
1 +
HK$10,710.00
Related Products
ZX series Micro-USB 2.0 receptacle connectors with a ...
Description:
ZX series Micro-USB 2.0 receptacle connectors with a compact design and high reliability. These ZX series Micro-USB receptacles are 60% smaller than standard mini USB connectors but still allow a high-speed data transfer of 480 Mbps specified in USB 2.0. ...
Micro USB 2.0 receptacle support OTG (On-The Go) ...
Description:
Micro USB 2.0 receptacle support OTG (On-The Go) for user accessibility and convenience. The housings of these Micro USB 2.0 receptacle connectors are made from high temperature UL94V-0 thermoplastic and metal shields provide EMI/ESD protection. These Micro USB 2.0 receptacle ...
Micro USB 2.0 receptacle support OTG (On-The Go) ...
Description:
Micro USB 2.0 receptacle support OTG (On-The Go) for user accessibility and convenience. The housings of these Micro USB 2.0 receptacle connectors are made from high temperature UL94V-0 thermoplastic and metal shields provide EMI/ESD protection. These Micro USB 2.0 receptacle ...
0.65 mm pitch micro USB Type B connector ...
Description:
0.65 mm pitch micro USB Type B connector with a compact design, a PCB space saving footprint and a high durability of over 10000 insertion cycles. The specification of these micro USB connectors supports OTG (On-The-Go) and enable portable devices ...