AFS 3P Safety Relay, 100 → 250 V dc, 100 → 250 V @ 50/60 Hz, 25 A, 600 V ac

  • RS Stock No. 175-3203
  • Mfr. Part No. 1SBL137082R1322
  • Manufacturer ABB Jokab
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

AFS 3P Safety Relay

The ABB Jokab safety relay is a 3-pole and throw configuration relay. It has a coil voltage of 100 to 250VAC at 50/60Hz and 100 to 250VDC, contact current rating is 25A and contact voltage rating is 600VAC. It reduces panel energy consumption. It has a front marked symbol that guarantees the right contactor status. Its yellow housing enables easy identification.

Features and Benefits

• Built-in surge suppression
• Control circuit with an electronic coil interface
• Dedicated 24VDC for direct control by PLC output
• Front-mounted auxiliary contact block
• Minimum switching capacity is 12V/3mA
• Mirror and mechanically linked contacts
• Protective cover to prevent manual operation

Applications

• Controlling circuits
• Machine safety applications
• Monitoring circuits

Certifications

• CSA C22.2 N°14
• EN 60947-1 / 60947-4-1
• IEC 60947-1 / 60947-4-1
• UL 508

Specifications
Attribute Value
Number of Contacts 3
Series AFS
Pole and Throw Configuration 3P
Normal State Configuration 3NO
Number Of Auxiliary Contacts 4
Auxiliary Contacts 2NO/2NC
Contact Current Rating 25 A
Contact Voltage Rating 600 V ac
Coil Voltage 100 → 250 V @ 50/60 Hz, 100 → 250 V dc
Terminal Type Screw
Length 45mm
Width 110.5mm
Depth 80mm
Minimum Operating Temperature -40 °C, -25 °C
Maximum Operating Temperature +60 °C, +70 °C
Dimensions 45 x 110.5 x 80 mm
5 In stock for delivery within 3 working days
Price Each
HK$ 542.91
(exc. GST)
units
Per unit
1 +
HK$542.91
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...