Infineon BGS13S4N9E6327XTSA1, RF Switch 3GHz 15dB Isolation CMOS 9-Pin TSNP-9-3

  • RS Stock No. 175-1419
  • Mfr. Part No. BGS13S4N9E6327XTSA1
  • Manufacturer Infineon
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

The BGS13S4N9 RF MOS switch is specifically designed for cell phone and mobile applications. Any of the 3 ports can be used as termination of the diversity antenna handling up to 30 dBm. It offers outstanding ESD robustness of 1kV.This SP3T offers low insertion loss and high robustness against interferer signals at the antenna port and low harmonic generation in termination mode.

3 high-linearity TRx paths with power handling capability of up to 30 dBm
Small form factor 1.1 x 1.1 mm2 x 0.375 mm
Low insertion loss @2.7GHz 0.55 dB
Low harmonic generation
High port-to-port-isolation
0.1 to 3.0 GHz coverage
On-chip control logic including ESD protection
GPIO control interface
No power supply blocking required
High EMI robustness

Specifications
Attribute Value
Maximum Insertion Loss 0.65dB
Minimum Isolation 15dB
Number of Switches 1
Technology CMOS
Mounting Type Surface Mount
Package Type TSNP-9-3
Pin Count 9
Dimensions 1.1 x 1.1 x 0.37mm
Length 1.1mm
Width 1.1mm
Height 0.37mm
Maximum Frequency 3GHz
Minimum Operating Temperature -40 °C
Maximum Operating Supply Voltage 3.3 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 1.8 V
On back order for despatch 30/12/2020, delivery within 3 working days
Price Each (On a Reel of 15000)
Was HK$0.99
HK$ 0.785
(exc. GST)
units
Per unit
Per Reel*
15000 +
HK$0.785
HK$11,775.00
*price indicative
Related Products
Suitable for main690V nominal voltageIngress protection IP55Full compliance ...
Description:
Suitable for main690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3"Padlockable off" handle assembly (3 padlocks up to 8mm dia shank)Supplied with a 3-pole switch body, terminal shroud, extension shaft door interlock and operation assembly (red/yellow emergency switch)Supplied as ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionInterlocked in "ON" position to prevent panel door being opened while switch is "ON"
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
Totally insulated enclosures to IP65Black thumb grip and ...
Description:
Totally insulated enclosures to IP65Black thumb grip and grey front plate, emergency stop versions have a red thumb grip and yellow front plateSurface mounting.