Arrow Electronics SmartEverything IoT Bluetooth Smart (BLE), GLONASS (GNSS), GPS, Near Field Communication (NFC), SigFox

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Arrow SmartEverything IoT Development Board with SIGFOX

The Arrow SmartEverything Development Board is a flexible Arduino form-factor prototyping platform for Internet-of-Things (IoT) and M2M applications. SmartEverything combines SIGFOX, Bluetooth and Near-Field Communication (NFC) wireless technologies with GPS and a suite of embedded sensors. Atmel’s SAM D21 ultra low-power ARM® Cortex®-M0+ Microcontroller is used to integrate the featured devices.

SIGFOX connectivity is a particular highlight; the embedded Telit LE51-868 S Wireless Module gives design engineers access to the rapidly expanding SIGFOX cellular wireless network. Across the world millions of IoT devices already utilise the low-power connectivity SIGFOX provides. For SIGFOX network details please visit http://www.sigfox.com/en/#!/connected-world.

Key Features

• 12 months of SIGFOX network access included
• Features 3 wireless technologies – SIGFOX, Bluetooth and Near Field Communication (NFC)
• Arduino form-factor
• Fully supported by Arduino IDE
• Comprehensive sensor suite including a 9-axis Inertial Measurement Unit (IMU)
• GPS Module with embedded antenna
• Flexible power supply options – Can be powered by USB, Battery or separate Power Supply
• SWD Connector – Allows programming and debugging with SAM-ICE and ATMEL-ICE
• Pushbuttons
• RGB LED
• Dimensions - 53.34 x 68.58 mm

Featured Devices

• Microcontroller - Atmel SAM D21 32-bit ultra low-power ARM® Cortex®-M0+ MCU
• SIGFOX - Telit LE51-868 S SIGFOX 868 MHz Wireless Module
• Bluetooth - TDK SESUB-PAN-T2541 Bluetooth Low Energy 4.0 Module based on TI’s CC2541 BTLE System-on-Chip (SoC)
• Near Field Communication - NXP NT3H1101FHK NFC Interface IC, separate NFC Antenna included
• GPS/GNSS - Telit Jupiter SE868-A GPS/GNSS Module with Integrated Antenna, supports GPS, QZSS, GLONASS and is Galileo ready
• 9-Axis Sensing - ST LSM9DS1 iNEMO Inertial Module with 3D accelerometer, 3D Gyroscope and 3D Magnetometer
• Humidity and Temperature Sensing - ST HTS221 Capacitive Digital Humidity and Temperature Sensor
• Proximity and Ambient Light Sensing - ST VL6180X Proximity and Ambient Light Sensor, combines an IR emitter, range sensor and ambient light sensor
• Pressure Sensor - ST LPS25H MEMS 260-1260 hPa Absolute Barometer and Altimeter
• Cryptographic Authentication - Atmel ATSHA204A CryptoAuth Chip

Kit Contents

1 x Arrow SmartEverything Development Board
1 x Pre-Installed TDK SESUB-PAN-T2541 Bluetooth module
1 x Pre-Installed NFC Antenna

Note

USB Cable is not included

Wireless Modules - Arrow Electronics

Specifications
Attribute Value
RF Technology Bluetooth Smart (BLE), GLONASS (GNSS), GPS, Near Field Communication (NFC), SigFox
Kit Classification Development Board
Kit Name SmartEverything IoT
Discontinued product
Related Products
SmartAXIS Touch series provide stable and efficient processing ...
Description:
SmartAXIS Touch series provide stable and efficient processing with the added benefit of easy data-logging capabilities. Supplied with an embedded 12 I/O PLC and can communicate with a variety of options makes this suitable for a wide variety of applications. ...
All Modicon M340 processors are supplied with an ...
Description:
All Modicon M340 processors are supplied with an 8Mb SD (Secure Digital) type Flash memory card. This memory card is intended for backing up the program, symbols and comments and the constants. Duplication and retrieval (on return of power) operations ...
Omron's CP1L series offers the compactness of a ...
Description:
Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers.
Expansion modules and accessories to support the Siemens ...
Description:
Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of ...