ON Semiconductor NCP1380ADR2G, PWM Current Mode Controller, 500 (Source) mA, -800 (Sink) mA, 65 kHz, -0.3 → 20 V

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

AC-DC Off-Line Controllers, NCP/NCV Series, ON Semiconductor

Power supply secondary side, synchronous rectification controllers. Fixed frequency flyback and forward PWM controllers.

Specifications
Attribute Value
Number of PWM Outputs 1
Control Method Current
Topology Flyback
Rise Time 75ns
Fall Time 60ns
Maximum Switching Frequency 65 kHz
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Output Current -800 (Sink) mA, 500 (Source) mA
Output Voltage 20 V
Dimensions 5 x 4 x 1.5mm
Minimum Operating Temperature -40 °C
Height 1.5mm
Typical Operating Supply Voltage -0.3 → 20 V
Width 4mm
Length 5mm
Maximum Operating Temperature +125 °C
On back order for despatch 27/05/2020, delivery within 3 working days
Price Each (On a Reel of 2500)
HK$ 3.99
(exc. GST)
units
Per unit
Per Reel*
2500 +
HK$3.99
HK$9,975.00
*price indicative
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...