- RS Stock No.:
- 609-4528
- Mfr. Part No.:
- XACB08
- Manufacturer:
- Schneider Electric
The image is for reference only, please refer to product details and specifications
- RS Stock No.:
- 609-4528
- Mfr. Part No.:
- XACB08
- Manufacturer:
- Schneider Electric
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CZ
Product Details
Pendant Control Station Accessories
A range of Schneider accessories from the Harmony XAC series for use with pendant control stations.
Suitable for all station types
Schneider Electric - Push Buttons
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.
Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support
Specifications
Attribute | Value |
---|---|
Series | Harmony XACB |
Cutout Diameter | 22mm |
Number of Cutouts | 8 |
Enclosure Colour | Yellow |
Enclosure Material | GRP |
IP Rating | IP65 |
Length | 680mm |
Width | 98mm |
Depth | 100mm |
Maximum Operating Temperature | +70°C |
Minimum Operating Temperature | -25°C |
For Use With | ZA2 Booted Operators |