Fairchild ISL9V5036P3_F085 IGBT, 46 A 300 V, 3-Pin TO-220AB

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Automotive Ignition IGBT, Fairchild Semiconductor

These EcoSPARK IGBT devices are optimised for driving automotive ignition coils. They have been stress tested and meet the AEC-Q101 standard.

Features

• Logic-level gate drive
• ESD Protection
• Applications: Automotive ignition coil driver circuits, Coil-on-Plug applications

RS Product Codes

864-8802 FGB3040CS 400V 20A D2PAK 864-8805 FGB3040G2_F085 400V 25A DPAK-2
807-0767 FGD3040G2_F085 400V 25A DPAK
864-8880 FGI3040G2_F085 400V 25A I2PAK
864-8899 FGP3040G2_F085 400V 25A TO220
864-8809 FGB3245G2_F085 450V 23A D2PAK-2
864-8827 FGD3245G2_F085 450V 23A DPAK
807-0776 FGD3440G2_F085 400V 25A DPAK
864-8818 FGB3440G2_F085 400V 25A D2PAK-2
864-8893 FGP3440G2_F085 400V 25A TO220
807-8751 ISL9V5036P3_F085 360V 31A TO220
862-9369 ISL9V5045S3ST_F085 450V 43A D2PAK

Note

Quoted current ratings apply when junction temperature Tc = +110°C.

Standards

AEC-Q101

IGBT Discretes & Modules, Fairchild Semiconductor

The Insulated Gate Bipolar Transistor or IGBT is a three-terminal power semiconductor device, noted for high efficiency and fast switching. The IGBT combines the simple gate-drive characteristics of the MOSFETs with the high-current and low–saturation-voltage capability of bipolar transistors by combining an isolated gate FET for the control input, and a bipolar power transistor as a switch, in a single device.

Specifications
Attribute Value
Maximum Continuous Collector Current 46 A
Maximum Collector Emitter Voltage 300 V
Maximum Gate Emitter Voltage ±10V
Maximum Power Dissipation 250 W
Package Type TO-220AB
Mounting Type Through Hole
Channel Type N
Pin Count 3
Switching Speed 1MHz
Transistor Configuration Single
Length 10.67mm
Width 4.7mm
Height 16.3mm
Dimensions 10.67 x 4.7 x 16.3mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +175 °C
Discontinued product
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...