Keysight Technologies N2790A Oscilloscope Probe, Probe Type: Differential, High Voltage 100MHz 1.4kV

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

Keysight High-voltage Differential Active Probes N2790A & N2791A

These high-voltage differential probes are for making, safely and accurately, floating measurements in power electronics circuits. They enable conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements (i.e. where neither point of measurement is at earth ground). Selectable attenuation settings make for highly versatile probes which come with tip accessories to facilitate working with large and small components in tight spaces.

Note

The N2790A has a differential amplifier in the probe head and an overrange indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.

Keysight Technologies Oscilloscope Probe

The Keysight Technologies oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1400V of differential voltage and 1000V of common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately.
It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000 Series (with version 5.26.0001 software), Infiniium 8000, 54830 Series (with version 5.7 software) and Infiniium 9000 Series (with version 2.0 software). Each of these scopes can support four N2790A probes.
Supplied with browser tips (2), alligator plunger clips (2), pincer clips (2), coloured ID tags (2 off each of 4), DC offset adjustment tool, manual

Features and Benefits

• Bandwidth is DC to 100MHz (–3dB)
• Attenuation ratio is 50:1/500:1
• Input impedance is 4Mohm ll7pF each side to ground
• Differential range is (50:1) 140±V (DC + peak AC)
• Maximum differential is (500:1) ±1400V (DC + peak AC)
• Common mode range is ±1000V (CAT II) or ±600V (CAT III)
• Absolute maximum voltage is±1500VDC Peak AC differential mode ±1300Vrms (CAT II) common mode
• Offset (typical) is adjustable
• Source input impedance is 1Mohm Autoprobe interface
• AC CMRR (typical) is -80dB at 50/60Hz and -50dB at 1MHz
• Ambient operating temperature ranges between -10°C and 50°C
• Power requirement 4xAA cells

Certifications

• IEC61010-031
• CAT II 1000V, CAT III 600V

Supplied with

browser tips (2), alligator plunger clips (2), pincer clips (2), coloured ID tags (2 off each of 4), DC offset adjustment tool, manual

Specifications
Attribute Value
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 100MHz
Maximum Common Mode Input Voltage 1.4kV
Connector Type BNC
Model Number p N2790A
Safety Category Level CAT II, CAT III
Safety Category Voltage 600 V, 1000 V
Series N
Safety Category CAT II 1000 V, CAT III 600 V
Rise Time 3.5ns
6 In stock for delivery within 3 working days
Price Each
HK$ 14,538.78
(exc. GST)
units
Per unit
1 +
HK$14,538.78
Related Products
2 Leg puller with quick release hooksSafe and ...
Description:
2 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
3 Leg puller with quick release hooksSafe and ...
Description:
3 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Gedore Universal puller 3-arm pattern, rigid legs with ...
Description:
Gedore Universal puller 3-arm pattern, rigid legs with leg brake. The leg brake prevents unintentional leg slipping. The leg can be slid along the cross-beam at the push of a button. By reversing the legs, this tool can be used ...
From the trusted RS PRO brand, this bearing ...
Description:
From the trusted RS PRO brand, this bearing puller is manufactured to a very high specification and subjected to rigorous testing which exceeds their stated capacities. The legs and beams are drop-forged from high-quality steel and then heat-treated for extra ...