RS PRO 1.8m Power Cable, Right Angle 2.5 mm Plug Lead to Unterminated, 1 A, 12 V

  • RS Stock No. 656-3894
  • Manufacturer RS PRO
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

DC Power Adaptor Leads

From RS Pro a high-quality DC adapter cable assembly for connecting a DC (direct current) source such as a power supply to an electrical device or for making a connection between two DC devices. This DC power cable assembly has a DC power connector on one end and the other end is unterminated to allow direct soldering into equipment. DC power cable assemblies are typically used to power small to medium appliances.

What is a DC Power Cable Assembly?

A DC power cable assembly sometimes referred to as a DC power cord, is an electrical cable used to make a connection between two DC devices or a DC appliance to a DC power source such as a power supply. The cable assembly is terminated at both ends with a DC power connector which can be a plug or a socket (these are sometimes referred to as barrel connectors). One end of the cable is connected to the DC power source and the other end is connected to the equipment that needs to be powered. These plugs or sockets usually have a straight or right angle orientation to allow for design flexibility. This DC power lead cable has a connector at just one end with bare wires at the other. The advantage of this is that one end of the cable to be soldered directly into the equipment which allows for custom installations

Where are DC Power Cables Used?

DC power cable assemblies are commonly used in small to medium-sized electrical appliances such as portable computers and monitors, electronic keyboards, electronic instruments, sound systems and radios

Features and Benefits

• 1.8 m cable length
• 0.129mm2 (26 AWG) cable CSA
• Non-terminated one end for customer installations
• Overmold to protect the connection junction, provide insulation and prevent the wire from bending at the solder joints

• Right angle plug with 2.5 mm pin diameter

Warning

  • Not to be used as mains connectors
Specifications
Attribute Value
Connector A 2.5 mm Plug Lead
Connector B Unterminated
Length 1.8m
Current Rating 1 A
Sheath Colour Black
Voltage Rating 12 V
899 In stock for delivery within 3 working days
Price Each
HK$ 54.74
(exc. GST)
units
Per unit
1 - 14
HK$54.74
15 - 49
HK$51.31
50 - 99
HK$50.19
100 +
HK$48.85
Related Products
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Glenair full nelson heatshrink boots (LSZH), series 77 ...
Description:
Glenair full nelson heatshrink boots (LSZH), series 77 type 2 for regulated environmental safety applications meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These LSZH semi rigid polyolefin heat shrink boots fit most standard heatshrink boot ...
Glenair full nelson lipless heatshrink boots, zero halogen, ...
Description:
Glenair full nelson lipless heatshrink boots, zero halogen, series 77 type 2 meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These halogen free polyolefin heat shrink boots have good resistance to oils, fuels and solvents and ...