Omron Retro-Reflective Photoelectric Sensor 4 m Detection Range Relay IP66 Block Style E3JMR4M4TG

  • RS Stock No. 157-7062
  • Mfr. Part No. E3JMR4M4TG
  • Manufacturer Omron
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

E3JM Slim Style, with or without Delay Timer

Through Beam, Retroreflective and Diffuse versions available
Food industry compatible
ABS Case, acrylics lens, PC Cover. IP66. LED indication
N/O and N/C (selectable)
Response time 30ms Max (version without delay timer)
Load switching relay SPCO type, rated to 3A (resistive) at 250 Vac
Delay timer versions have selection of ON delay, OFF delay and ONE-SHOT (except 256-427:256-433 & 256-449) outputs with delay times of 0.1 to 5 seconds (variable)
Through beam version supplied as a transmitter and receiver pair
Operating mode: Light ON/Dark ON (selectable)
Supply Voltage 12 to 240 Vdc or 24 to 240 Vac
Retroreflective version employs polarised light to reduce false triggering. Reflector type E39-R1 included
Operating temperature range -25° → +55° C
Relay compatibility 5Vac 10A min.
Teminal block, PG13.5 entry
Power rating: Through beam 3W, remainder 2W
Mounting bracket and Cable glands included

Specifications
Attribute Value
Sensor Style Block
Detection Type Retroreflective
Detection Range 4 m
Output Type Relay
Electrical Connection 5-Terminal Screw
Maximum AC Voltage 250V
Maximum DC Voltage 5V
Light Source LED
IP Rating IP66
Maximum Current 3 A
Response Time 30 ms
Housing Material ABS
Maximum Operating Temperature +55°C
Minimum Operating Temperature -25°C
Series E3JM
34 In stock for delivery within 3 working days
Price Each
HK$ 1,315.60
(exc. GST)
units
Per unit
1 +
HK$1,315.60
Related Products
Maximum system length: 75 mSwitch function: 2 NC ...
Description:
Maximum system length: 75 mSwitch function: 2 NC + 2 NO (standard)Built-in reset buttonCable pull eyelet, low costVisualisation of correct cable tensionMeets EN418 and IEC947-5-5Protection class IP67.
The Telemecanique sensors XY2CE is 240VAC rated voltage ...
Description:
The Telemecanique sensors XY2CE is 240VAC rated voltage wire switch. It has E-stop rope pull switch on left side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope ...
The PSENrope from Pilz is a manually operated ...
Description:
The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors. It provides maximum safety, as the emergency stop function can be triggered at ...
The ER series of safety rope pull switches ...
Description:
The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage spans, rope pull switches eliminate the need for numerous E-stop buttons reducing installation time ...