Texas Instruments, DLP4500FQE Visible Light 1-Element Photodetector, 700Nm, Surface Mount LCCC package

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

DLP4500 series, Texas Instruments

The DLP4500 digital micromirror device (DMD) is a digitally controlled MOEMS (micro-opto-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP4500 can be used to modulate the amplitude and/or direction of incoming light. The DLP4500 creates light patterns with speed, precision, and efficiency.

The DLP4500 is a latchable, electrical-in/optical-out semiconductor device. The compact physical size of the DLP4500 is well-suited for portable equipment where small form factor and lower cost are important. The compact package compliments the small size of LEDs to enable highly efficient, robust light engines.

The DLP4500 is one of two devices in the DLP 0.45 WXGA chip set. The DLP4500 is optimised for the visible light spectrum (420-700nm) and the DLP4500NIR in the Near Infra-red spectrum (700-2500nm).

Proper function and reliable operation of the DLP4500 requires that it be used in conjunction with the DLPC350 controller.

Typical Applications

Machine Vision
Industrial Inspection
3D Scanning
3D Optical Metrology
Automated Fingerprint Identification
Face Recognition
Augmented Reality
Interactive Display
Information Overlay
Spectroscopy
Chemical Analysers
Medical Instruments
Photo-Stimulation
Virtual Gauges

Digital Micromirror Device (DMD)

Specifications
Attribute Value
Spectrums Detected Visible Light
Wavelength of Peak Sensitivity 700nm
Number of Elements 1
Number of Pins 80
Mounting Type Surface Mount
Dimensions 20.7 x 9.1 x 3.398mm
Package Type LCCC
Height 3.398mm
Length 20.7mm
Maximum Wavelength Detected 700nm
Minimum Wavelength Detected 420nm
Width 9.1mm
Spectral Range of Sensitivity 420 → 700 nm
22 In stock for delivery within 3 working days
Price Each
HK$ 1,956.07
(exc. GST)
units
Per unit
1 - 4
HK$1,956.07
5 +
HK$1,926.73
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Packaging Options:
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...