NCS20082DR2G onsemi, Op Amp, RRIO, 1.2MHz, 1.8 → 5.5 V, 8-Pin SOIC
- RS Stock No.:
- 920-9852
- Mfr. Part No.:
- NCS20082DR2G
- Manufacturer:
- ON Semiconductor
Discontinued product
- RS Stock No.:
- 920-9852
- Mfr. Part No.:
- NCS20082DR2G
- Manufacturer:
- ON Semiconductor
Product overview and Technical data sheets
Legislation and Compliance
Product Details
NCS20082, 5V, 1.2MHz, Rail-to-Rail I/O, Dual Operational Amplifier, ON Semiconductor
The ON Semiconductor NCS2008 operational amplifiers provide rail-to-rail input and output operation and 1.2 MHz bandwidth.
As a CMOS device with high input impedance and low bias currents they are ideal for interfacing with signal sensors.
As a CMOS device with high input impedance and low bias currents they are ideal for interfacing with signal sensors.
Wide Supply Range: 1.8 V to 5.5 V
Wide Temperature Range: -40°C to 125°C
Wide Temperature Range: -40°C to 125°C
Operational Amplifiers, ON Semiconductor
Specifications
Attribute | Value |
|---|---|
| Amplifier Type | General Purpose |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Power Supply Type | Single |
| Number of Channels per Chip | 2 |
| Pin Count | 8 |
| Typical Single Supply Voltage | 1.8 → 5.5 V |
| Typical Gain Bandwidth Product | 1.2MHz |
| Typical Slew Rate | 0.4V/µs |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +125 °C |
| Typical Voltage Gain | 120 dB |
| Maximum Input Voltage | 5.5 V |
| Rail to Rail | Rail to Rail Input/Output |
| Output Current | ±100 mA |
| Offset Voltage | 4mV |
| Dimensions | 5 x 4 x 1.5mm |
| Height | 1.5mm |
| Length | 5mm |
| Typical Input Voltage Noise Density | 30nV/√Hz |
| Minimum Input Voltage | 1.8 V |
| Input Offset Current | 1100pA |
| Input Voltage Range | 1.8 → 5.5 V |
| Width | 4mm |