- RS Stock No.:
- 418-704
- Mfr. Part No.:
- SSD4
- Manufacturer:
- Eaton
The image is for reference only, please refer to product details and specifications
20 In stock for delivery within 3 working days
Added
Price Each (In a Pack of 5)
HK$19.176
Units | Per unit | Per Pack* |
5 - 120 | HK$19.176 | HK$95.88 |
125 - 495 | HK$18.406 | HK$92.03 |
500 + | HK$17.642 | HK$88.21 |
*price indicative |
- RS Stock No.:
- 418-704
- Mfr. Part No.:
- SSD4
- Manufacturer:
- Eaton
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
The low-temperature rise enables the fuse to be suitable for high-density mounting applications
Fuse links, specifically designed for the protection of applications
Conforms to industry standards
Low voltage fuse
Suitable for three-phase applications
Suitable for type 2 co-ordinated applications as defined in IEC 947-4
Low power loss, typically 20% lower than the requirements of BS88
Fuse links, specifically designed for the protection of applications
Conforms to industry standards
Low voltage fuse
Suitable for three-phase applications
Suitable for type 2 co-ordinated applications as defined in IEC 947-4
Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Note
Eaton formerly known as Bussmann
Specifications
Attribute | Value |
---|---|
Current Rating | 4A |
Fuse Size | E1 |
Voltage Rating | 240V ac |
Fuse Standard | BS 88, IEC 269 |
Application Category | gG |
Tag Width | 12.7mm |
High Rupture Capacity | Yes |
Overall Length | 47mm |
Body Diameter | 12mm |
Tag Type | Bolted |
Tag Orientation | Offset |
Body Height | 23mm |
Fuse Dimensions | 12 x 23mm |
Series | Bussmann |