6 Pole Enclosed Non Fused Isolator Switch, NO/NC, 32 A, 13 kW, IP65
- RS Stock No. 393-9787
- Mfr. Part No. T3-4-15682/I2H/SVB+K-CI-K2
- Manufacturer Eaton
Insulated Enclosed Padlockable Switch Disconnector
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
High impact thermoplastic enclosure to IP65
Built in earth commoning block
Lockable in the OFF position, with up to three padlocks
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Approvals
UL and CSA
Standards
IEC (EN60) 947 and IEC (EN60) 204
| Attribute | Value |
|---|---|
| Number of Poles | 6 |
| Maximum Current | 32 A |
| Mounting Type | Enclosed |
| Normal State Configuration | NO/NC |
| Power Rating | 13 kW |
| IP Rating | IP65 |
| Accepts Padlocks | Yes |
| Voltage Rating | 400 V ac |
| Length | 180mm |
| Width | 100mm |
| Depth | 100mm |
| Throw Configuration | Single |
| Handle Colour | Red |
| Minimum Operating Temperature | -25°C |
| Terminal Type | Screw |
| Maximum Operating Temperature | +40°C |
