3 + N Pole Non Fused Isolator Switch, 100 A

  • RS Stock No. 819-927
  • Mfr. Part No. 100AXTN2
  • Manufacturer Eaton
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Exel 2 Switch Disconnectors

Can be used on systems up to 550 Vac
Manufactured from rust protected sheet steel
Door may be removed for ease of installation
Switch can be locked on or off by means of a padlock
Red and green switch position indicators

Specifications
Attribute Value
Number of Poles 3 + N
Maximum Current 100 A
Accepts Padlocks Yes
Voltage Rating 250 V dc, 415 V ac
Electrical Phase 3
Switch Rating 3750 A
Length 329mm
Width 367mm
Depth 167mm
Minimum Operating Temperature -25°C
Terminal Type Screw
1 In stock for delivery within 3 working days
Price Each
HK$ 4,788.67
(exc. GST)
units
Per unit
1 - 5
HK$4,788.67
6 +
HK$4,477.34
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...