Fluke 726 Multi Function Calibrator, 55mA, 30V dc
- RS Stock No.:
- 850-7685
- Mfr. Part No.:
- FLUKE-726
- Manufacturer:
- Fluke
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 850-7685
- Mfr. Part No.:
- FLUKE-726
- Manufacturer:
- Fluke
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- US
Product Details
Fluke Precision Multifunction Process Calibrator
The Fluke precision multifunction process calibrator is a powerful, yet easy-to-use field calibrator. It can be used to measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules to test and calibrate almost any process parameter. This calibrator will also interpret results without the help of a calculator and store measurement data for later analysis.
Features and Benefits
More precise measurement and calibration source performance, accuracies of 0.01%
Two separate channels
Two separate channels
measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure using any of 29 Fluke 700Pxx pressure modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and dead band of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error % calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure using any of 29 Fluke 700Pxx pressure modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and dead band of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error % calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement
Applications
Process control automation
Manufacturing
Instrumentation
Manufacturing
Instrumentation
Certifications
CE certified
CSA certified
CSA certified
Specifications
Attribute | Value |
|---|---|
| Maximum Voltage Measurement | 30V dc |
| Maximum Current Measurement | 55mA |
| Maximum Pressure Measurement | 700bar |
| Port Connections | 4 mm Socket |
| Battery Life | 80 h |
| Battery Type | AA |
| Power Source | Battery |
| Weight | 400g |
| Height | 200mm |
| Length | 180mm |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | -10°C |
| Model Number p | 726 |
| Width | 85mm |