Infineon BTN7970BAUMA1, BLDC Motor Driver IC, 18 V 50A 7-Pin, TO-263

  • RS Stock No. 165-7508
  • Mfr. Part No. BTN7970BAUMA1
  • Manufacturer Infineon
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Specifications
Attribute Value
Motor Type BLDC
Output Configuration Half Bridge
Maximum IGBT Collector Current 50A
Maximum Collector Emitter Voltage 18 V
Mounting Type Surface Mount
Package Type TO-263
Pin Count 7
Maximum Operating Supply Voltage 18 V
Minimum Operating Supply Voltage 8 V
Typical Switching Frequency 25kHz
Width 9.25mm
Length 10mm
Maximum Operating Temperature +150 °C
Height 4.4mm
Minimum Operating Temperature -40 °C
Dimensions 10 x 9.25 x 4.4mm
1000 In stock for delivery within 3 working days
Price Each (On a Reel of 1000)
HK$ 43.962
(exc. GST)
units
Per unit
Per Reel*
1000 +
HK$43.962
HK$43,962.00
*price indicative
Related Products
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
DIN rail mounted terminals, with universal mounting foot ...
Description:
DIN rail mounted terminals, with universal mounting foot clips to both ’G’ profile (asymmetric to BS5825:1990) and ’top hat’ profile (symmetric to BS5584:1978) rails, with a range of features to suit all applications. The 2.5 to 10mm² terminals have common ...
The ATEX Phoenix Contact UK 5 N BU, ...
Description:
The ATEX Phoenix Contact UK 5 N BU, blue, feed-though terminal block has been designed for universal use. Having a universal foot makes it easy to mount onto NS 35 and NS 32 DIN rails. • Compact design helps you ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...