ABB Phase, Voltage Monitoring Relay, 3 Phase, DPDT, 300 → 500V ac, DIN Rail
- RS Stock No.:
- 775-7902
- Mfr. Part No.:
- 1SVR730884R3300 CM-MPS.41S
- Manufacturer:
- ABB
On back order for despatch 10/05/2024, delivery within 3 working days
Added
Price Each
Was HK$2,331.84
You pay
HK$1,670.44
| Units | Per unit |
| 1 + | HK$1,670.44 |
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.:
- 775-7902
- Mfr. Part No.:
- 1SVR730884R3300 CM-MPS.41S
- Manufacturer:
- ABB
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
ABB Monitoring Relay, 4A Maximum Current Rating, 0 to 30s Adjustable Time Delay - CM-MPS Series - 1SVR730884R3300 CM-MPS.41S
Shut down electrical faults before they reach your gear with this monitoring relay from ABB. It watches out for phase failure, overvoltage and undervoltage, packing comprehensive electrical protection into one handy component. When the unit detects a problem, it instantly trips the circuit breaker, so it's sure to stop faults from becoming hazardous and drives down the risk of hardware damage. Fast DIN rail mounting means you can leave your tools in the box.
Features & Benefits
• Wide voltage monitoring range between 300 and 500V AC, fitting in with many power supplies
• Electrical service life of 100,000 cycles for long-lasting fault detection
• Narrow body measurements of 103.7 (L) x 22.5 (W) x 85.6mm (H) to slot into busy cabinets
• Built-in time delay between 0 and 30s gives you the option to filter out noise and transient events
• Electrical service life of 100,000 cycles for long-lasting fault detection
• Narrow body measurements of 103.7 (L) x 22.5 (W) x 85.6mm (H) to slot into busy cabinets
• Built-in time delay between 0 and 30s gives you the option to filter out noise and transient events
Applications
• Food production
• Packing plants
• Manufacturing industry
• Packing plants
• Manufacturing industry
Do I need to connect an extra power supply to use this relay?
No, this unit's powered by the circuit it monitors, so there's no need to hook up a separate electrical supply.
Specifications
Attribute | Value |
|---|---|
| Monitoring Application | Phase, Voltage |
| Electrical Phase | 3 |
| Contact Configuration | DPDT |
| Voltage Sensing Range | 300 → 500V ac |
| Voltage Sensitivity | Overvoltage, Undervoltage |
| Mounting Type | DIN Rail |
| Phase Sensitivity | Phase Failure, Phase Imbalance, Phase Sequence |
| Time Delay | 0.1 → 30 s, 0s |
| Frequency Sensing Range | 45 → 65Hz |
| Series | CM-MPS |
| Width | 22.5mm |
| Maximum Operating Temperature | +60°C |
| Dimensions | 103.7 x 22.5 x 85.6mm |
| Current Range | 2 → 4A |
| Maximum Voltage Sensed | 500V ac |
| Operating Temperature Range | -25 → +60°C |
| Minimum Voltage Sensed | 300V ac |
| Length | 103.7mm |
| Height | 85.6mm |
| Standards Met | UL |
| Terminal Type | Screw |
| Minimum Operating Temperature | -25°C |