Orion3 Light Beam Sender & Receiver, 4 Beam, 8m Max Range

  • RS Stock No. 920-9619
  • Mfr. Part No. 2TLA022306R0300
  • Manufacturer ABB
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

ABB Orion3 Light Grids

The Orion3 light grids from ABB combine both the transmitter and receiver in a single unit, called the active unit. The beams are then reflected using a mirror called the passive unit, which reduces cabling because it is not connected. The Orion3 is available in two options, a base model and an extended model.

Features and Benefits

No more functions or settings than necessary
A local reset button can be connected directly to the light grid: no need for cable between the reset button and the electrical cabinet or for an extra control module
Each light grid can monitor the actuators without any extra control module (EDM function)
Less cabling because only the active unit is connected
Alignment help and a wide angle within the limits of a Type 4 device facilitate alignment
Rotation brackets simplify alignment too
M12 connectors speed up cabling
Since the alignment level is displayed on the unit, the alignment can be improved before an unwanted stop occurs
Extensive error indication reduces troubleshooting time
Muting sensors are connected directly to the extended model, with no need for a remote muting module
Body detection, 2 to 4 beams
Up to 8 m operating distance
Sturdy profile

Applications

For body detection
When power is available on only one side
When a sturdy profile is necessary

Note

Both the base and extended models provide detection, local reset and external device monitoring (EDM), but the extended model also provides muting.

Standards

EN ISO 13849-1:2008 PL e, Cat 4
EN 61508-1..4:2010 SIL3
EN 62061:2005/A1:2013 SIL CL 3

Approvals

CE, cULus, TUV.

Perimeter and Access Guard

Specifications
Attribute Value
Range Orion3
Component Type Receiver, Sender
Minimum Scanning Distance 0.5m
Maximum Scanning Distance 8m
Safety Type 4
SIL IEC 61508 3
PL EN ISO 13849-1 E
Number of Beams 4
Maximum Response Time 12 ms
Terminal Type 8-Pin M12 Connector
Dimensions 1306.35 x 52 x 56.9 mm
Protective Height 1200mm
Beam Diameter 42mm
Application Body
Height 56.9mm
Features Active and Passive Unit, Body Detection, Local Reset and EDM, Sturdy Profile, Type 4, Upto 8 m Operating Distance, 4 Beams
Width 52mm
Length 1.306m
1 In stock for delivery within 3 working days
Price Each
HK$ 8,516.07
(exc. GST)
units
Per unit
1 +
HK$8,516.07
Related Products
C27 is a polypropylene metallized film, with a ...
Description:
C27 is a polypropylene metallized film, with a cylindrical plastic can-type construction filled with resin. It uses faston and plastic deck or cable terminals. Applications: Typical applications include motor start S0 safety class. Self-healingRated frequency of 50 Hz and 60 ...
Kemet C878 Series are polypropylene capacitors metallised film ...
Description:
Kemet C878 Series are polypropylene capacitors metallised film with cylindrical aluminium can type filled with liquid resin, plastic deck and overpressure safety device. Self-healing Rated frequency of 50 Hz and 60 Hz High capacitance density Safety device protection.
This capacitor series is designed specifically for motor ...
Description:
This capacitor series is designed specifically for motor run applications where the capacitors are used with permanent split capacitor type motors. To be used on either 50 Hz or 60 Hz systems. Not to be used at higher frequencies or ...
Gem III General Purpose capacitors are used for ...
Description:
Gem III General Purpose capacitors are used for filtering on various light industrial equipment. The capacitors offer lasting reliability and safe operation. Metallised film capacitorsPressure Sensitive Interrupter (psi)Long-term reliability and safe operationCost effectiveSuperior qualityGeneral PurposeQuick ...