Luna Optoelectronics, NSL-19M51 LDR (Light Dependent Resistor) 20 kΩ Light, 20MΩ Dark, 2-Pin TO-18

Product overview and Technical data sheets
Legislation and Compliance
Non Compliant
Product Details

CdS cell, NSL series, Silonex

Light dependent resistors are two cadmium sulphide (cDS) photoconductive cells with responses similar to that of the human eye. The cell resistance falls with increasing light intensity.

Solid-state photosensor that uses photoconductivity to lower resistance value when irradiated with light
Ceramic package with sensitivity up to 690 nm
TO-5 and TO-18 packages
Suitable for use in applications like street light auto-flashers and camera light metres

Applications

Applications include
Smoke detection
Automatic lighting
Control batch counting
Burglar alarm systems

Photodiodes, Silonex

Specifications
Attribute Value
Minimum Light Resistance 20 kΩ
Dark Resistance 20MΩ
Typical Fall Time 55ms
Typical Rise Time 45ms
Resistor Material CdS
Number of Pins 2
Mounting Type Through Hole
Package Type TO-18
Maximum Light Resistance 100kΩ
Maximum Operating Temperature 75°C
Minimum Operating Temperature -60°C
Operating Temperature Range -60 → +75°C
Power Dissipation 50mW
Voltage Rating 100 V
Light Resistance Range 20 kΩ → 100 kΩ
6380 In stock for delivery within 3 working days
Price Each (In a Pack of 10)
HK$ 8.377
(exc. GST)
units
Per unit
Per Pack*
10 - 290
HK$8.377
HK$83.77
300 - 590
HK$5.207
HK$52.07
600 - 1240
HK$4.529
HK$45.29
1250 - 2490
HK$4.47
HK$44.70
2500 +
HK$4.427
HK$44.27
*price indicative
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...