Nexperia 74LVC573APW,118 Octal Octal D Type Latch, Transparent D Type, 3 State, 20-Pin TSSOP

  • RS Stock No. 170-4836
  • Mfr. Part No. 74LVC573APW,118
  • Manufacturer Nexperia
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

The 74LVC573A consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications. A Latch Enable (LE) input and an Output Enable (OE) input are common to all internal latches. When LE is HIGH, data at the Dn inputs enters the latches. In this condition, the latches are transparent, that is, a latch output will change each time its corresponding D-input changes.

Mixed 5 V and 3.3 V applications
Save board space
Low cost interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Memory controllers
Backplane interfaces

Specifications
Attribute Value
Logic Family 74LVC
Latch Mode Transparent
Latching Element D Type
Number of Bits 8bit
Number of Elements per Chip 8
Number of Channels per Chip 8
Output Type 3 State
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 20
Dimensions 6.6 x 4.5 x 0.95mm
Height 0.95mm
Length 6.6mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Maximum Operating Supply Voltage 3.6 V
Width 4.5mm
Minimum Operating Supply Voltage 1.2 V
On back order for despatch 14/09/2020, delivery within 3 working days
Price Each (On a Reel of 2500)
HK$ 1.18
(exc. GST)
units
Per unit
Per Reel*
2500 - 2500
HK$1.18
HK$2,950.00
5000 - 10000
HK$1.128
HK$2,820.00
12500 - 22500
HK$1.096
HK$2,740.00
25000 +
HK$1.023
HK$2,557.50
*price indicative
Related Products
RS PRO offers this great tube connector that ...
Description:
RS PRO offers this great tube connector that fits 25 mm strut profile. It provides structural strength to the joints and connections. No screws are required as these are simply pushed together into the correct square tubing. These are great ...
Internal swivel tee can be used with straight ...
Description:
Internal swivel tee can be used with straight tube to give variable angles on hand rails, barriers, staircases or used in conjunction with other fittings to give various offset configurations.
Industrial stairs and working platforms can be built ...
Description:
Industrial stairs and working platforms can be built by the addition of further internal tension components and a beam profiles. Standard size for attaching components to profilesSlot stone can be inserted into the groove at any point along the profile, ...
The RK LightClamps plastic connection system guarantees flexibility ...
Description:
The RK LightClamps plastic connection system guarantees flexibility thanks to the design of its reducing bushes (sold separately). This design enables the clamping of the most various tube sections. The change to other diameters or sections requires only the change ...