Texas Instruments CD74HCT573M Octal Latch, Transparent D Type, 3 State, 4.5 → 5.5 V, 20-Pin SOIC

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

74HCT Family Flip-Flops & Latches, Texas Instruments

Texas Instruments range of Flip-Flops and Latches from the 74HCT Family of CMOS Logic ICs. Inputs of the 74HCT family are 74LSTTL compatible, and the products use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but with the low power consumption of standard CMOS integrated circuits.

High-Speed CMOS Logic
Operating Voltage 4.5 to 5.5 V
Compatibility: Input TTL, Output CMOS

74HCT Family

Specifications
Attribute Value
Logic Family HCT
Latch Mode Transparent
Latching Element D Type
Number of Bits 8bit
Output Type 3 State
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 20
Dimensions 12.8 x 7.52 x 2.35mm
Height 2.35mm
Length 12.8mm
Maximum Operating Temperature +125 °C
Maximum Operating Supply Voltage 5.5 V
Width 7.52mm
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -55 °C
361 In stock for delivery within 3 working days
Price Each
HK$ 7.21
(exc. GST)
units
Per unit
1 - 9
HK$7.21
10 - 19
HK$7.09
20 - 49
HK$6.96
50 - 249
HK$6.82
250 +
HK$6.70
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Packaging Options:
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...