FTDI Chip USB to Serial/Parallel Breakout Module for FT232H, UM232H-B

  • RS Stock No. 888-8794
  • Mfr. Part No. UM232H-B
  • Manufacturer FTDI Chip
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

UM232H USB to Serial UART Development Module, FTDI Chip

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6in wide 28-pin DIP socket. The USB connection to a host system is via a mini-B USB connector.

USB 2.0 Hi-Speed (480Mbits/s) and Full Speed (12Mbits/s) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation

Specifications
Attribute Value
Interface Function USB to Serial/Parallel
Kit Classification Breakout Module
Featured Device FT232H
On back order for despatch 08/07/2020, delivery within 3 working days
Price Each
HK$ 134.77
(exc. GST)
units
Per unit
1 +
HK$134.77
Related Products
WR-FPC 0.5 mm SMT FPC ZIF connectors with ...
Description:
WR-FPC 0.5 mm SMT FPC ZIF connectors with a bottom contact configuration and hinged flip-lock actuator. These 0.5mm FPC ZIF connectors have a low profile, lightweight, space saving design and meet the increasing demand for high density, secure connections in ...
This range of Wurth PFC/FFC 0.5 mm pitch ...
Description:
This range of Wurth PFC/FFC 0.5 mm pitch Connectors are SMT, Vertical types which require Zero Insertion Force (ZIF). These Wurth PFC/FFC 0.5 mm pitch vertical connectors are capable of 25 mating cycles and have a Flammability Rating of UL94-V0. ...
FFC/FPC connectors with a 0.5mm centreline ideal for ...
Description:
FFC/FPC connectors with a 0.5mm centreline ideal for routing signals through devices when standard wire to board connectors are too large. These 0.5mm FFC/FPC connectors have ZIF (Zero Insertion Force) where an actuator is used to secure the FPC. ZIF ...
FH28 0.5 mm ZIF (zero insertion force) FPC/FFC ...
Description:
FH28 0.5 mm ZIF (zero insertion force) FPC/FFC connectors with a robust, ruggedized design. These FH28 FPC/FFC connectors have a robust flip lock actuator which is supported either end of the connector by reinforced metal fittings. The actuator is held ...