FTDI Chip, 3.3 V USB to UART Cable, C232HD-DDHSP-0

  • RS Stock No. 751-1172
  • Mfr. Part No. C232HD-DDHSP-0
  • Manufacturer FTDI Chip
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

USB 2.0 Hi-Speed to MPSSE Cable, FTDI Chip

The USB 2.0 Hi-Speed to MPSSE cables contain a small internal electronic circuit board, utilising the FTDI FT232H, encapsulated into the USB connector end of the cable. This chip handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with 3.3 or 5V digital interfaces to USB.

Based on the single chip USB Hi-Speed FT232H device
USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
USB Type A connector for direct connection to a host or hub
USB bus powered
Fully assisted hardware or X-On / X-Off software handshaking
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
1kByte receive and transmit buffers for high data throughput
Transmit and receive LED drive signals
Adjustable receive buffer timeout
Support for USB suspend and resume
Low operating and USB suspend current Low USB bandwidth consumption
UHCI / OHCI / EHCI host controller compatible
Operating temperature range: -40 to +85°C
Cable length: 1800mm
FTDI’s royalty-free D2XX drivers eliminate the requirement for USB driver development in most cases

FTDI Chip USB To UART Cable

The FTDI chip USB 2.0 high-speed to UART cable incorporates FTDI’s FT232H USB to UART interface IC device that handles all the USB signalling and protocols. The cable provides a fast and simple way to connect devices with 3.3V digital interfaces to USB. This cable contains a small internal electronic circuit board, utilising the FT232H, encapsulated into the USB connector end of the cable. It has a single pole, receptaclex10 end connector.

Features and Benefits

• Adjustable receive buffer timeout
• Asynchronous UART transfer data rate up to 12Mbaud
• Fully assisted hardware or X-On/X-Off software handshaking
• Low operating and USB suspend current
• Low USB bandwidth consumption
• Maximum output of 450mA at 5VDC on VCC
• Operating temperature ranges between -40°C and 85°C
• Receive and transmit buffers of 1kb for high data throughput
• Support for USB suspend and resume
• Ten core cable with length of 1.8m
• Transmit and receive LEDs
• UART interface support for 7 or 8 data bits,1 or 2 stop bits and odd/even/mark /space/no parity
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 Hi-Speed (480Mbps) and full speed (12Mbps) compatible
• USB bus powered
• USB Type A connector for direct connection to USB host or hub

Applications

• Electronic systems
• Prototyping platform for USB interface on
• Rapid USB integration into existing
• Set Top Box PC - USB interface
• Upgrading legacy peripherals to USB
• USB bar code readers
• USB digital camera interface
• USB hardware modems
• USB industrial control
• USB instrumentation
• USB Medical applications
• USB to RS232/RS422/RS485 converters
• USB wireless modems

Certifications

• CE
• FCC approved

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Cable
Kit Name 3.3 V
On back order for despatch 04/02/2020, delivery within 3 working days
Price Each
HK$ 257.60
(exc. GST)
units
Per unit
1 - 4
HK$257.60
5 - 9
HK$252.53
10 +
HK$238.77
Related Products
2 Leg puller with quick release hooksSafe and ...
Description:
2 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
3 Leg puller with quick release hooksSafe and ...
Description:
3 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Gedore Universal puller 3-arm pattern, rigid legs with ...
Description:
Gedore Universal puller 3-arm pattern, rigid legs with leg brake. The leg brake prevents unintentional leg slipping. The leg can be slid along the cross-beam at the push of a button. By reversing the legs, this tool can be used ...
From the trusted RS PRO brand, this bearing ...
Description:
From the trusted RS PRO brand, this bearing puller is manufactured to a very high specification and subjected to rigorous testing which exceeds their stated capacities. The legs and beams are drop-forged from high-quality steel and then heat-treated for extra ...