ON Semiconductor KA2803BDTF Intelligent Power Switch, Earth Leakage Detector, 0.4mA, 12 → 20V, 5mW 8-Pin, PDIP

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Ground Fault Interrupt (GFI) Controllers, Fairchild Semiconductor

Ground-Fault Circuit Interrupter is a low-power controller for AC-receptacle, that detect hazardous current paths to ground and ground to neutral faults. The circuit interrupter then disconnects the load from the mains power line before a harmful or lethal shock occurs.

Ground Fault Interrupter
Earth Leakage Detector
Require less adjusting and calibrating

Ground Fault Interrupt (GFI) Controllers, Fairchild Semiconductor

Specifications
Attribute Value
Power Switch Type Earth Leakage Detector
Number of Outputs 1
Voltage 12 → 20V
Current 0.4mA
Power Rating 5mW
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 10.15 x 6.35 x 3.3mm
Length 10.15mm
Width 6.35mm
Height 3.3mm
Maximum Operating Temperature +80 °C
Minimum Operating Temperature -25 °C
2775 In stock for delivery within 3 working days
Price Each (In a Pack of 25)
Was HK$4.28
HK$ 3.689
(exc. GST)
units
Per unit
Per Pack*
25 - 100
HK$3.689
HK$92.225
125 - 225
HK$2.921
HK$73.025
250 - 1475
HK$2.837
HK$70.925
1500 - 2975
HK$2.338
HK$58.45
3000 +
HK$2.05
HK$51.25
*price indicative
Packaging Options:
Related Products
BLM15G Series Chip ferrite beads for high frequency ...
Description:
BLM15G Series Chip ferrite beads for high frequency noise suppression over a wide frequency range. High impedance characteristic in 1GHz or higher FrequencyHigh impedance characteristic over a wide frequency band range of 100MHz to 6GHzSmall decrease in impedance during current ...
Excellent anti-EMI properties and low DC resistancePlaced very ...
Description:
Excellent anti-EMI properties and low DC resistancePlaced very close next to the interference source even with smallest size 0402, maximum impedance 1000ΩReliable Ni-Sn electrodes Ideal for data line filtering and voltage de-couplingHigh rated current up to 6A Recommended for reflow ...
The BLM series of ferrite beads from Murata ...
Description:
The BLM series of ferrite beads from Murata do not require a ground connection and are ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal ...
CIM10 series closed magnetic circuit configuration avoids crosstalk ...
Description:
CIM10 series closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBsPerfect shape for automatic mounting with no directionalityUsed in High frequency EMI prevention application to computers, printers, VCRs, TVs and mobile phones.