BALLUFF, M8 x 1, PNP-NO Inductive Sensor 59mm Length, 12 → 30 V dc supply voltage , IP67 Rating

  • RS Stock No. 773-9890
  • Mfr. Part No. BES M08MI-PSC20B-S49G
  • Manufacturer BALLUFF
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

3 / 4-Wire Flush Inductive Proximity Sensors

Features and benefits

Can be embedded in metal with a minimal flush free zone Short circuit and polarity reversal protection
LED for visual indication of output state

Specifications
Attribute Value
Body Style Barrel
Thread Size M8 x 1
Output Type PNP-NO
Detection Range 2 mm
Terminal Type M8 - 3 Pin
Supply Voltage 12 → 30 V dc
Length 59mm
Maximum DC Voltage 30V
Mounting Type Flush Mount
IP Rating IP67
Switching Current 200 mA
Housing Material Copper Zinc
Maximum Switching Frequency 700Hz
Shielding Shielded
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Short Circuit Overload Protection Yes
Reverse Polarity Protection Yes
34 In stock for delivery within 3 working days
Price Each
HK$ 387.70
(exc. GST)
units
Per unit
1 +
HK$387.70
Related Products
BLM15G Series Chip ferrite beads for high frequency ...
Description:
BLM15G Series Chip ferrite beads for high frequency noise suppression over a wide frequency range. High impedance characteristic in 1GHz or higher FrequencyHigh impedance characteristic over a wide frequency band range of 100MHz to 6GHzSmall decrease in impedance during current ...
Excellent anti-EMI properties and low DC resistancePlaced very ...
Description:
Excellent anti-EMI properties and low DC resistancePlaced very close next to the interference source even with smallest size 0402, maximum impedance 1000ΩReliable Ni-Sn electrodes Ideal for data line filtering and voltage de-couplingHigh rated current up to 6A Recommended for reflow ...
The BLM series of ferrite beads from Murata ...
Description:
The BLM series of ferrite beads from Murata do not require a ground connection and are ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal ...
CIM10 series closed magnetic circuit configuration avoids crosstalk ...
Description:
CIM10 series closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBsPerfect shape for automatic mounting with no directionalityUsed in High frequency EMI prevention application to computers, printers, VCRs, TVs and mobile phones.