Baumer, M12 x 1, NAMUR Inductive Sensor 34mm Length, 5 30 V dc supply voltage , IP67 Rating

  • RS Stock No. 763-8318
  • Mfr. Part No. IFRM 12X9103
  • Manufacturer Baumer
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CH
Product Details

NAMUR Inductive Sensors

A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres.

ATEX approved, suitable for hazardous areas
Shielded or unshielded versions
Housing material: nickel plated brass or stainless steel

Standards

II 1G Ex ia IIC T5/6

Approvals

PTB 03 ATEX 2146

Specifications
Attribute Value
Body Style Barrel
Thread Size M12 x 1
Output Type NAMUR
Detection Range 4 mm
Terminal Type Cable
Supply Voltage 5 30 V dc
Length 34mm
Width 12mm
Maximum DC Voltage 30V
Mounting Type Non Flush
Switching Current 4 mA
IP Rating IP67
Housing Material Nickel Plated Brass
Reverse Polarity Protection No
Maximum Switching Frequency 2kHz
Shielding Unshielded
Minimum Operating Temperature -25°C
Standards Met CE, CULus Listed, EAC
Hazardous Area Certification ATEX
Short Circuit Overload Protection No
Maximum Operating Temperature +75°C
28 In stock for delivery within 3 working days
Price Each
HK$ 514.80
(exc. GST)
units
Per unit
1 +
HK$514.80
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...