Parker Hydraulic Straight Threaded Adapter 4-4F6MK4S, Connector A G 1/4 Male, Connector B G 1/4 Female

  • RS Stock No. 807-687
  • Mfr. Part No. 4-4F6MK4S
  • Manufacturer Parker
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Swivel Nut Adaptor

Straight female to male BSP parallel thread adaptor.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.

Features and Benefits

Visible bite of progressive ring helps prevent blow-off
Excellent sealing capacity when used in various applications including vacuum and hydraulic systems
Stress evenly distributed throughout out minimising concentration at the bite point
Compact overall dimensions make EO fittings ideal or confined spaces

Note

For adaptors of unequal sizes then the lower pressure rating is applicable.
K4 adapters are not interchangeable with JIS P4 fittings.

Standards

BS5200

Warning

  • Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Specifications
Attribute Value
Connector A G 1/4 Male
Connector B G 1/4 Female
Material Steel
Finish Yellow Chromated, Zinc Plated
Connector A - Thread Size 1/4in
Connector A - Thread Standard G
Connector A - Gender Male
Connector B - Thread Size 1/4in
Connector B - Gender Female
Connector B - Thread Standard G
Maximum Operating Pressure 450 bar
Maximum Operating Temperature +120°C
Minimum Operating Temperature -40°C
Stock check temporarily unavailable - call for stock availability
Price Each (In a Pack of 2)
HK$ 39.57
(exc. GST)
units
Per unit
Per Pack*
2 - 10
HK$39.57
HK$79.14
12 - 48
HK$37.69
HK$75.38
50 +
HK$35.835
HK$71.67
*price indicative
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...