ON Semiconductor TPS2398DMT7G, 1-Channel, Hot Swap Controller, Negative Voltage, -36 → -80 V 8-Pin, MSOP

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Wide Input Supply: −36 V to −80 V
Transient Rating to −100 V
Improved Transient Response
Εnable Input (EN)
Programmable Current Limit
Programmable Current Slew Rate
Fault Timer to Eliminate Nuisance Trips
Open−Drain Power Good Output (/PG)
Wide input voltage range
Withstand input voltage spikes to −100 V
Input current spike suppression during input voltage transient
Output voltage could be switched on/off
Current limit could be set by external resistor
Current slew rate could be set by external capacitor
Load current spikes shorter than about 4us are ignored
/PG signal could be used to monitor hot-swap status
−48 V Distributed Power Systems
Redundant Negative Voltage Supplies
Central Office Switching Systems
End Products
Power source for telecom / computing (rack) systems

Attribute Value
Hot Swap Controller Type Negative Voltage
Typical Operating Supply Voltage -36 → -80 V
Number of Channels 1
External Sense Resistor Yes
External FET N-Channel
PGOOD Output Logic Active Low
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Fault Management Latched Off
Dimensions 3.1 x 3.1 x 0.95mm
Height 0.95mm
Length 3.1mm
Width 3.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
3000 In stock for delivery within 3 working days
Price Each (On a Reel of 3000)
HK$ 9.074
(exc. GST)
Per unit
Per Reel*
3000 +
*price indicative
Related Products
TE SQ series wire wound resistors are high ...
TE SQ series wire wound resistors are high powered resistors which feature either wire or power oxide elements. The SQ series resistors are wound or deposited on a fine non - alkali ceramic core then embodied in a ceramic case ...
A range of high power resistors in small ...
A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic ...