Si7210-B-04-IVR Silicon Labs,, Linear Hall Effect Sensor, 5-Pin SOT-23

  • RS Stock No. 144-6544
  • Mfr. Part No. Si7210-B-04-IVR
  • Manufacturer Silicon Labs
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Si7210 I2C Hall Effect Magnetic Sensors

The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single compact package with I2C functionality.

• Digital I2C Interface with 4 selectable addresses
• Optional Digital Alert output
• Optional ratiometric analogue output
• Optional Tamper detect versions
• Wide 1.7 to 5.5 V operating voltage range
• Industry-leading sensitivity allows use with larger air gaps and smaller magnets
• Low power consumption to improve operating life in battery powered applications
• Compact 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications

The Si7210 family of Hall effect magnetic sensors from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-bit analog-to-digital converter, and an I 2C interface. Leveraging Silicon Labs' proven CMOS design techniques, the Si7210 family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall effect sensors, the Si7210 family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets.

High-Sensitivity Hall Effect SensorHigh-Precision 13-bit Signal PathOutput Bandwidth up to 20 kHzSensitivity Drift < ±5% over 0-70 °COptional Digital Alert OutputOptional Ratiometric Analog OutputTemperature Sensor Data also available

Hall Effect Sensors, Silicon Labs

Specifications
Attribute Value
Mounting Type Surface Mount
Pin Count 5
Minimum Magnetic Sensor Release Point ±0.2 mT
Maximum Magnetic Sensor Operating Point ±1.1 mT
Minimum Operating Supply Voltage 1.7 V
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Width 1.6mm
Height 1.15mm
Dimensions 2.9 x 1.6 x 1.15mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 0.4 mT, 17 %
Automotive Standard AEC-Q100
On back order for despatch 28/05/2020, delivery within 3 working days
Price Each (In a Pack of 5)
HK$ 6.126
(exc. GST)
units
Per unit
Per Pack*
5 +
HK$6.126
HK$30.63
*price indicative
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
A variable speed regulator unit is for use ...
Description:
A variable speed regulator unit is for use with electric motors, miniature drill equipment etc. Its very small size which allows it to be easily installed, especially where space limitation is an important factor. Adjustment is by a miniature slotted ...
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range. The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...