Semikron SKYPER 12 press-fit C 600A, Gate Driver Module CMOS, 15 A, 15V

  • RS Stock No. 122-0387
  • Mfr. Part No. SKYPER 12 press-fit C 600A
  • Manufacturer Semikron
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SKYPER® 12 Press-fit IGBT Driver Module

The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V.
For suitable IGBT modules see 122-0385 to 122-0387

• Fits to 1200V & 1700V IGBT modules
• Drives Econodual and SEMIX press-fit modules
• Two 1W output channels for half-bridge applications
• Up to 8 μC gate charge output capacity
• Qualified safe operating area ensures best possible performance
• High reliability with MTBF rate > 5 Million hours
• Short-circuit protected over the complete operating temperature range
• Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off
• Robust rectangle signal transmission
• High noise immunity with short pulse suppression and robust interface
• Insulated over-temperature trip on secondary side
• Primary and secondary under-voltage protection (UVP)
• Integrated isolated power supply for the secondary side

MOSFET & IGBT Drivers, Semikron

Specifications
Attribute Value
Logic Type CMOS
Output Current 15 A
Supply Voltage 15V
Mounting Type PCB Mount
29 In stock for delivery within 3 working days
Price Each
HK$ 2,726.68
(exc. GST)
units
Per unit
1 - 1
HK$2,726.68
2 - 4
HK$2,698.06
5 - 9
HK$2,669.75
10 +
HK$2,641.74
Related Products
Suitable for main690V nominal voltageIngress protection IP55Full compliance ...
Description:
Suitable for main690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3"Padlockable off" handle assembly (3 padlocks up to 8mm dia shank)Supplied with a 3-pole switch body, terminal shroud, extension shaft door interlock and operation assembly (red/yellow emergency switch)Supplied as ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionInterlocked in "ON" position to prevent panel door being opened while switch is "ON"
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
Totally insulated enclosures to IP65Black thumb grip and ...
Description:
Totally insulated enclosures to IP65Black thumb grip and grey front plate, emergency stop versions have a red thumb grip and yellow front plateSurface mounting.