Telemecanique Sensors Plastic Fibre Optic Sensor 1500 mm, IP64, IP641

Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Fibre Optic Light Guides for XUD Amplifiers

The diffuse scan types have figure of eight cross section cables which terminate in a round cross section at the sensing face. There are 2 core strands at the detector face.
Thru beam light guides (stock nos. 324-1636 and 281-1622) can be fitted with an optional lens (stock no. 324-1664) for increased sensing distances. (up to 400mm for 324-1636 and up to 1500mm for 281-1622)
The sensing distance of 200mm for stock no. 513-5549 is the maximum sensing distance. The distance is determined by the length the fibre is cut to
Operating temperature -25°C to +60°C

Note

Stock numbers 281-1600, 281-1616, 324-1636, 281-1622, 324-1658 and 324-1642 are stocked as spares only (RS no longer supplies the amplifiers with which they are used).

//media.rs-online.com/t_line/LD281160-01.jpg
//media.rs-online.com/t_line/LF281160-10.jpg
Specifications
Attribute Value
Detection Range 1500 mm
Fibre Optic Type Plastic
IP Rating IP64, IP641
Housing Material PE
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
1 In stock for delivery within 3 working days
Price Each
HK$ 851.18
(exc. GST)
units
Per unit
1 - 5
HK$851.18
6 +
HK$790.86
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...