ESD Continuous Monitor 5V dc

  • RS Stock No. 126-8851
  • Manufacturer RS PRO
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

RS Pro Body Voltage Monitor

The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator. The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.

Features & Benefits

• High-quality RS Pro Body Voltage Monitor • Second monitored jack for a supervisor or second operator
• Dual-Channel Monitoring Technology
• LED & Sound Alarm System

Specifications
Attribute Value
Terminal Type Banana
Supply Voltage 5V dc
Height 30 mm
Number of Operators 1
Number of Worksurfaces 1
Length 61mm
Width 69mm
Supervisor Monitoring Yes
Parking Station No
Charge Detection No
EOS Detection Yes
Complies with EN 61340-5-1 Yes
1 In stock for delivery within 3 working days
Price Each
HK$ 1,981.42
(exc. GST)
units
Per unit
1 - 4
HK$1,981.42
5 - 9
HK$1,882.41
10 - 39
HK$1,822.91
40 +
HK$1,684.27
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...