Standard Digital Transistors

  • RS Stock No. 183-5012
  • Mfr. Part No. DTA113ZU3T106
  • Manufacturer ROHM
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

DTA113ZU3 is an digital transistor (Resistor built-in type transistor). Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors.

Built-In Biasing Resistors, R1 = 1kΩ, R2 = 10kΩ
Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors.
Only the on/off conditions need to be set for operation, making the circuit design easy.
Complementary NPN Types: DTC113Z series

Specifications
Attribute Value
Transistor Type PNP
Number of Elements per Chip 1
Maximum Continuous Collector Current -100 mA
Typical Input Resistor 1 kΩ
Base-Emitter Resistor 10kΩ
Mounting Type Surface Mount
Package Type SOT-323
Pin Count 3
Minimum DC Current Gain 33
Maximum Power Dissipation 200 mW
Transistor Configuration Single
Typical Resistor Ratio 10
Configuration Single
Height 0.9mm
Width 1.35mm
Maximum Operating Temperature +150 °C
Dimensions 2.1 x 1.35 x 0.9mm
Length 2.1mm
200 In stock for delivery within 3 working days
Price Each (In a Pack of 200)
HK$ 0.381
(exc. GST)
units
Per unit
Per Pack*
200 - 800
HK$0.381
HK$76.20
1000 - 1800
HK$0.318
HK$63.60
2000 +
HK$0.254
HK$50.80
*price indicative
Packaging Options:
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...