ON Semiconductor, DTC115EET1G NPN Digital Transistor, 100 mA 50 V 100 kΩ, Ratio Of 1, 3-Pin SOT-416

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Dual Resistor Digital NPN Transistors, ON Semiconductor

Standards

Manufacturer Part Nos with S or NSV prefix are automotive qualified to AEC-Q101 standard.

Digital Transistors, ON Semiconductor

Resistor-equipped bipolar transistors, also known as “Digital Transistors” or “Bias Resistor Transistors”, incorporating one or two integrated resistors. A single series input resistor, or a potential divider of two resistors, allows these devices to be directly driven from digital sources. Both single and dual transistor versions are available.

Specifications
Attribute Value
Transistor Type NPN
Number of Elements per Chip 1
Maximum Continuous Collector Current 100 mA
Maximum Collector Emitter Voltage 50 V
Typical Input Resistor 100 kΩ
Mounting Type Surface Mount
Package Type SOT-416 (SC-75)
Pin Count 3
Minimum DC Current Gain 80
Transistor Configuration Single
Maximum Power Dissipation 300 mW
Maximum Collector Emitter Saturation Voltage 0.25 V
Maximum Emitter Base Voltage 6 V
Typical Resistor Ratio 1
Width 0.9mm
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +150 °C
Length 1.65mm
Dimensions 1.65 x 0.9 x 0.8mm
Height 0.8mm
12000 In stock for delivery within 3 working days
Price Each (On a Reel of 3000)
HK$ 0.159
(exc. GST)
units
Per unit
Per Reel*
3000 +
HK$0.159
HK$477.00
*price indicative
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...