Si8660BA-B-IS1 Silicon Labs, PCB SMT, 6-Channel Digital Isolator 150MBps, 1 kV, 16-Pin SOIC

  • RS Stock No. 753-2529
  • Mfr. Part No. Si8660BA-B-IS1
  • Manufacturer Silicon Labs
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Si866x Series 6-channel Digital Isolators

The Si866x Series of six-channel digital isolators, based on the proprietary capacitive isolation technology, enable low propagation delay and skew, low emissions, high noise immunity and high reliability for a long lifecycle.

Digital Isolators, Silicon Laboratories

The Silicon Labs broad range of Digital Isolation products offers significant improvements over older isolation technologies such as opto-couplers. They demonstrate lower power consumption, greater reliability and higher performance, and are generally smaller in size and lower in cost. These CMOS-based devices exhibit stable operating characteristics over a wide temperature range and do not suffer from the lifespan limitations of opto-coupled devices.

Specifications
Attribute Value
Maximum Data Rate 150Mbps
Number of Channels 6
Package Type SOIC
Maximum Forward Voltage 5.5V
Maximum Input Current 12.3 mA
Isolation Voltage 1 kV
Rise Time 4ns
Number of Pins 16
Mounting Type Surface Mount
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Length 9.9mm
Depth 1.25mm
Width 3.9mm
26 In stock for delivery within 3 working days
Price Each
HK$ 17.30
(exc. GST)
units
Per unit
1 - 24
HK$17.30
25 - 99
HK$16.70
100 - 999
HK$16.44
1000 +
HK$16.12
Packaging Options:
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...