Weller 70 01 51 3.3mm Hot Air Desoldering Nozzle for use with Pyropen Piezo Soldering Iron

  • RS Stock No. 162-9810
  • Mfr. Part No. T0051614199
  • Manufacturer Weller
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Pyropen piezo soldering iron

Weller offers a comprehensive range of soldering tips for use with Pyropen Piezo soldering irons (RS 250-3898, 176-6870). These tips are extremely reliable and can increase solder process productivity which provides great cost efficiency and less rework caused by poor solder points or faulty tools. Every soldering tip is designed for a specific application and the types include the most common shapes which include conical and chisel.
These Weller soldering tips are available in various tip types, forms and sizes. This range includes the following soldering iron tips:

  • 161-9958 - T0051612599, 70 01 06 Straight Conical Soldering Iron Tip

  • 161-9964 - T0051614399, 70 01 53, 7mm Hot Air Desoldering Nozzle

  • 161-9986 - T0051613299, 70 01 13, 5mm Straight Chisel Soldering Iron Tip

  • 161-9992 - T0051613099, 70 01 11, 8mm Straight Chisel Soldering Iron Tip

  • 162-2409 - T0051615899, 7001 54 Soldering Iron Reflector

  • 162-8104 - T0051612499, 70 01 05, 0.5mm Straight Conical Soldering Iron Tip

  • 162-9810 - T0051614199, 70 01 51, 3.3mm Hot Air Desoldering Nozzle

  • 660-911 - T0051612399, 70 01 04, 2mm Straight Hoof Soldering Iron Tip

Features and Benefits:

Powered by gas, this iron has an autonomy of 3 hours per filling and a heat up time of approximately 30 seconds. It is fully autonomous, thanks to its ignition button.
Temperature range between 200 and 500 °C is controlled by increasing and decreasing the gas flow. Power supplied: 80 W.
This set is supplied with a carry case, a 3 mm tip, a hot air nozzle and a gas recharge kit.

Typical Applications:

Soldering is the process used to build a soldering connection by using the heated tip of a soldering iron to melt soldering wire. The soldering tips are available in many different sizes and tip shapes, dependant on the application they are being used for. They are used to melt solder wire to connect two elements or components together to create a permanent connection and are often utilised in an electronics or manufacturing capacity as they often need to be conductive. The process of soldering is most commonly used by:

  • DIY enthusiasts

  • Plumbers

  • Electricians

  • Vehicle technicians

Soldering is often used for:
  • General wiring applications

  • Electrical repair work at home, in factories or for vehicles

FAQs


How long do soldering iron tips last for?

If high quality iron tips are used, they can last for years with the proper care and cleaning.

Gas - Weller

Specifications
Attribute Value
Desoldering Tool Type Hot Air Nozzle
Model Number 70 01 51
Type Hot Air
Nozzle Size 3.3mm
For Use With Pyropen Piezo Soldering Iron
2 In stock for delivery within 3 working days
Price Each
HK$ 181.61
(exc. GST)
units
Per unit
1 +
HK$181.61
Related Products
Darlington transistor power drivers are high-voltage, high-current switch ...
Description:
Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs ...
7-channelsInput resistor to limit base currentOutput voltage surge ...
Description:
7-channelsInput resistor to limit base currentOutput voltage surge absorption clamp diode.
Bipolar Junction Transistors (BJT) broad range provides complete ...
Description:
Bipolar Junction Transistors (BJT) broad range provides complete solutions for various circuit application needs. Innovative packages are designed for minimal size, highest reliability and maximum thermal performance.
A broad range of NPN and PNP Bipolar ...
Description:
A broad range of NPN and PNP Bipolar Transistors from STMicroelectronics including General Purpose, Darlington, Power and High-Voltage devices in both SMT and Through-hole packages.