- RS Stock No.:
- 131-1332
- Mfr. Part No.:
- 5.07.01 Flasher ARM
- Manufacturer:
- SEGGER
- RS Stock No.:
- 131-1332
- Mfr. Part No.:
- 5.07.01 Flasher ARM
- Manufacturer:
- SEGGER
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Flasher ARM Programmer
The Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and an ARM core. Flasher ARM is designed for programming Flash targets with the J-Flash software or stand-alone. In addition, Flasher ARM has all of the J-Link functionality.
Supported Processors
ARM Cortex-A: A5/A7/A8/A9/A12/A15/A17
ARM Cortex-M: M0/M0+/M1/M3/M4/M7
ARM Legacy: ARM7, ARM9, ARM11
ARM Cortex-M: M0/M0+/M1/M3/M4/M7
ARM Legacy: ARM7, ARM9, ARM11
Features
Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
10/100 Ethernet via RJ45 connector
Supports internal and external Flash memory devices
64MB memory for storage of target program
Serial in target programming supported
Data files can be updated as mass storage or via J-Flash
Host interface: USB 2.0 or RS-232 DE9 connector
Target interface: JTAG/SWD 20-pin
Powered through USB connection
Can be used as J-Link (JTAG emulator) with download speed up to 1MB/sec
Programming speed typically between 30KB/sec and 1MB/sec
Max programming speed depends on target hardware and max programming speed of the Flash memory
ASCII command interface to control Flasher without use of PC program
Authorized Flashing allows limit to number of Flash programming cycles and to protect the Flasher against non-authorized access in case of external production
Dimensions: 121 x 66 x 30mm
Free software updates, 2 years of support
10/100 Ethernet via RJ45 connector
Supports internal and external Flash memory devices
64MB memory for storage of target program
Serial in target programming supported
Data files can be updated as mass storage or via J-Flash
Host interface: USB 2.0 or RS-232 DE9 connector
Target interface: JTAG/SWD 20-pin
Powered through USB connection
Can be used as J-Link (JTAG emulator) with download speed up to 1MB/sec
Programming speed typically between 30KB/sec and 1MB/sec
Max programming speed depends on target hardware and max programming speed of the Flash memory
ASCII command interface to control Flasher without use of PC program
Authorized Flashing allows limit to number of Flash programming cycles and to protect the Flasher against non-authorized access in case of external production
Dimensions: 121 x 66 x 30mm
Free software updates, 2 years of support
Supplied with
Ethernet cable, 20-pin target ribbon cable, RS-232 serial cable, USB cable
Specifications
Attribute | Value |
---|---|
For Use With | Flash microcontrollers |
Kit Name | Flasher ARM Programmer |
Product Type | Programmer |