ON Semiconductor NCV7428D15R2G System Basis Chip, 4.9 → 5.1 V, 1.8mA 8-Pin, SOIC

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

NCV7428 System Basis Chip, ON Semiconductor

The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use.

• Output supply voltage: +3.3V (NCV7428D13), +5V (NCV7428D15) • Output supply current: 70mA
• Undervoltage detector with reset output to supplied microcontroller
• LIN transceiver, LIN2.x and J2602 compliant
• Load dump protection (+45V)
• LIN bus pin protected against transients in an automotive environment
• ESD protection level for Vs and LIN > ±8kV
• Operating temperature range: -40 to +125°C
• AEC-Q100 qualified

RS Product Codes

842-7885 NCV7428D13R2G System Basis Chip, +3.3V output
842-7888 NCV7428D15R2G System Basis Chip, +5V output

Standards

AEC-Q100

Specifications
Attribute Value
Minimum Output Voltage 4.9 V
Maximum Output Voltage 5.1 V
Minimum Input Voltage 5.5 V
Maximum Input Voltage 28 V
Minimum Output Current 1.8mA
Maximum Output Current 70mA
Number of Outputs 1
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Width 3.99mm
Automotive Standard AEC-Q100
Length 4.98mm
Height 15.49mm
Dimensions 4.98 x 3.99 x 15.49mm
1940 In stock for delivery within 3 working days
Price Each (In a Pack of 10)
HK$ 6.384
(exc. GST)
units
Per unit
Per Pack*
10 - 40
HK$6.384
HK$63.84
50 - 90
HK$5.703
HK$57.03
100 - 240
HK$5.357
HK$53.57
250 - 490
HK$5.252
HK$52.52
500 +
HK$5.149
HK$51.49
*price indicative
Packaging Options:
Related Products
The DCM305E is designed to check earth leakage ...
Description:
The DCM305E is designed to check earth leakage currents, however the upper range enables TRMS AC current measurements of up to 100 A. TRMS meters can measure both pure, undistorted, sinusoidal AC waveforms and non-sinusoidal AC waveforms which can contain ...
The iME3100 energy measurement counter is used to ...
Description:
The iME3100 energy measurement counter is used to measure the active energy consumed by single-phase, three-phase or three-phase + neutral type electrical circuits. Operating voltage: 3 x 100/173 Vac (50/60 Hz) → 3 x 277/480 Vac (50/60 Hz)Imax: 63 AIP40 ...