ROHM BM2P134Q-Z, DC-DC DC-DC Converter 7-Pin, DIP

  • RS Stock No. 184-7691
  • Mfr. Part No. BM2P134Q-Z
  • Manufacturer ROHM
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The PWM type DC/DC converter for AC/DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolated devices. This series has a built-in starter circuit that tolerates 650 V (BM2P137Q) / 800 V (BM2P137QK), and it contributes to low power consumption. With a current detection resistor for switching as internal device, it can be designed as small power supply. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The oscillation frequency is fixed to 100 kHz A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET which tolerates 650 V / 800 V makes the design easy.

PWM Current Mode Method
Frequency Hopping Function
Burst Operation at Light Load
Built-in 650 V Starter Circuit that Tolerates
Built-in 650 V Super Junction MOSFET
VCC Pin Under Voltage Protection
VCC Pin Over Voltage Protection
Over Current Limiter Function per Cycle
Soft Start Function

Attribute Value
Minimum Input Voltage 10.6 V
Maximum Input Voltage 14.05 V
Converter Type DC-DC
Number of Outputs 1
Mounting Type Through Hole
Package Type DIP
Pin Count 7
Maximum Operating Temperature 105 °C
Minimum Operating Temperature -40 °C
Width 6.35mm
Length 9.27mm
Dimensions 9.27 x 6.35 x 5.33mm
Switching Regulator Yes
Maximum Switching Frequency 100 kHz
Height 5.33mm
15 In stock for delivery within 3 working days
Price Each (In a Pack of 5)
HK$ 14.928
(exc. GST)
Per unit
Per Pack*
5 - 45
50 - 95
100 - 145
150 +
*price indicative
Packaging Options:
Related Products
Shaded pole ac motor gear unitSuitable for many ...
Shaded pole ac motor gear unitSuitable for many applications requiring a low speed, high torque and quiet running unitTypical applications include catering equipment, vending machines, feed screw and transport mechanismsMotor is rated for continuous operation with Class B insulation and ...
Genuine spare motor for S series fans. ...
Genuine spare motor for S series fans.
These axial fans comprise a helix with 5 ...
These axial fans comprise a helix with 5 blades with a diameter ranging from 154 to 300 mm depending on model and an IP42 protection AC motor (230 V - 50 Hz).Applications: Blower mode: the air flows from the motor ...
The iQ fan motor assembly is designed to ...
The iQ fan motor assembly is designed to run with 70% less power than its Q motor predecessor. The use of EC motor technology, combining permanent magnet operation and microprocessor controls, achieves more efficient and cooler running which consumes 8W ...