STMicroelectronics ULN2803A Octal NPN Darlington Pair, 500 mA 50 V HFE:1000, 18-Pin PDIP

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Darlington Transistor Arrays, STMicroelectronics

Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs in the IC package to simplify the application board layout. The interface is standard logic level for TTL or CMOS.

STMicroelectronics ULN2803A Darlington pair is a is a through hole eight Darlington array in DIP package. The array consists of eight Darlington transmitters with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the OFF state.

Features

Integral suppression diodes

Outputs may be paralleled for higher current capability

Operating temperature range from -20°C to 85°C

18 Pin

Output current to 500 mA

Output voltage to 50 V

Darlington Transistor Drivers

Specifications
Attribute Value
Transistor Type NPN
Maximum Continuous Collector Current 500 mA
Maximum Collector Emitter Voltage 50 V
Maximum Emitter Base Voltage 50 V
Package Type PDIP
Mounting Type Through Hole
Pin Count 18
Transistor Configuration Common Emitter
Number of Elements per Chip 8
Minimum DC Current Gain 1000
Maximum Collector Emitter Saturation Voltage 1.1 V
Length 23.24mm
Dimensions 23.24 x 7.1 x 3.93mm
Width 7.1mm
Height 3.93mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -20 °C
Stock check temporarily unavailable - call for stock availability
Price Each (In a Pack of 5)
HK$ 10.486
(exc. GST)
units
Per unit
Per Pack*
5 - 20
HK$10.486
HK$52.43
25 - 45
HK$9.44
HK$47.20
50 - 95
HK$9.308
HK$46.54
100 - 245
HK$7.872
HK$39.36
250 +
HK$7.762
HK$38.81
*price indicative
Packaging Options:
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...