ITT Cannon, TSTRECT Nylon D-sub Connector Backshell, 6 Way, Strain Relief
- RS Stock No. 466-949
- Mfr. Part No. 192923-5970
- Manufacturer ITT Cannon
Hood (for cable shell type A)
One snaps on each side of the shell, improving appearance and giving some cable support. Ends may be secured by cable tie, lacing cord, etc
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
| Attribute | Value |
|---|---|
| Number of Contacts | 6 |
| Housing Material | Nylon |
| Colour | Black |
| Strain Relief | Yes |
| Series | TSTRECT |
