Microchip Technology PAC1933T-I/JQ, Current Monitor 16-Pin, UQFN

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The PAC1933 is a three-channel power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible through I2C / SMBus including an 8 sample average for reading stability.

Triple High-Side Current Sensor:
100 mV full scale range for current sense voltage
Selectable bidirectional measurement capability
External sense resistor sets full scale range
0 to 32V Input Common -Mode Voltage
1% Power Measurement Accuracy Over a Wide Dynamic Range
On-Chip Accumulation of 28-bit Power Results for Energy Measurement
48-bit power accumulation register
Sampling rates of 8, 64, 256, and 1024 samples per second
At least 17 minutes of power accumulation data at 1024 samples per second
2.7V to 5.5V Supply Operation:
Separate VDD for I/O pin
1.62V to 5.5V capable SMBus and digital I/O
I2C Fast mode plus and SMBus 3.0

Specifications
Attribute Value
Offset Voltage ±0.1mV
Package Type UQFN
Pin Count 16
Mounting Type Surface Mount
Dimensions 4 x 4 x 0.5mm
Maximum Input Voltage 5.5 V
Minimum Input Voltage 2.7 V
Product Height 0.5mm
Product Length 4mm
Product Width 4mm
240 In stock for delivery within 3 working days
Price Each (In a Pack of 10)
HK$ 12.07
(exc. GST)
units
Per unit
Per Pack*
10 - 40
HK$12.07
HK$120.70
50 - 90
HK$9.897
HK$98.97
100 +
HK$9.415
HK$94.15
*price indicative
Packaging Options:
Related Products
Based on the successful and popular standard CPC ...
Description:
Based on the successful and popular standard CPC series, these fully sealed IP65 power connectors utilise precision-formed Powerband contacts that offer a rating of up to 45A for single contacts, in isolation. Manufactured from high strength, impact resistant thermoplastic, rated ...
Multimate Series II and III+ uninsulated signal Contacts ...
Description:
Multimate Series II and III+ uninsulated signal Contacts for use with rectangular M series and CPC connectors.
A range of connector contacts suitable for use ...
Description:
A range of connector contacts suitable for use within the Toughcon range of connectors. Both male and female version are available, the high quality contacts available in this range are a welcome addition to any application which requires circular connectors. ...
A ferrule is required (Series 332056). ...
Description:
A ferrule is required (Series 332056).