TE Connectivity PLASTI-GRIP Series Insulated Crimp Ring Terminal, M6 Stud Size, 2.6mm² to 6.6mm² Wire Size, Yellow

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

TE Connectivity PLASTI-GRIP Ring Tongue Wire Crimp Terminals

PLASTI-GRIP closed barrel ring tongue wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP closed barrel ring tongue crimp terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funneled entry on the wire barrel enables the stripped wire to be inserted more easily.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

TE Connectivity Plasti-Grip Terminals

Temperature range: PVC -25°C to +90°C
  Nylon -55°C to +105°C
Termination material: Tin plated Copper  
Termination insulation: Rings, spades, wire pins  
  6.35mm blades, splices PVC
  6.35mm receptacles Nylon 6.6
  (including shrouded)  
Specifications
Attribute Value
Series PLASTI-GRIP
Insulation Insulated
Insulation Material Vinyl
Inner Ring Diameter 6.73mm
Outer Ring Diameter 13.49mm
Maximum Wire Size mm² 6.6mm²
Minimum Wire Size mm² 2.6mm²
Minimum Wire Size AWG 12AWG
Maximum Wire Size AWG 10AWG
Stud Size M6
Colour Yellow
Contact Material Copper
Contact Plating Tin
Overall Length 33.71mm
5000 In stock for delivery within 3 working days
Price Each (In a Box of 500)
HK$ 1.72
(exc. GST)
units
Per unit
Per Box*
500 +
HK$1.72
HK$860.00
*price indicative
Related Products
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
From ERNI, this TMC series of sub-miniature d-built ...
Description:
From ERNI, this TMC series of sub-miniature d-built connectors are designed for use with ribbon cables. With 9, 15, 25, 37 pin connectors available, the series also offers appropriate strain relief and connector screws for reliable interfacing. The trapezoidal design ...
From 3M, this range of 101 Series Mini ...
Description:
From 3M, this range of 101 Series Mini D Ribbon (MDR) Connectors are .050" IDC Wiremount Shielded Plugs. The design of the 101 Series Mini D Ribbon (MDR) Connectors, provides IDC terminations for the individual cores and wiper-on-wiper contact. The ...