Advance Tapes AT525 Non-Conductive Copper Tape, 10mm x 33m

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

AT525 35μ Copper Foil Shielding Tape

35μ copper foil coated with a non-conductive acrylic adhesive supplied on a removable silicone release liner

Provides good sheilding effectiveness
Good soldering abilities

Note

To prevent tarnishing the tape should not be touched with bare hands. In service protection can be provided by Printed Circuit lacquer stock no. 569-290. UL listed.

Advance Tapes Copper Tapes

The Advance Tapes copper tape is a 35μ, coated with a non-conductive acrylic adhesive, supplied on a removable silicon liner. This tape is 0.07mm thick, 10mm wide and 33m long.Note:To prevent tarnishing, do not touch this tape with bare hands.EMI/RFI shielding tapes:When using this tape, galvanic compatibility should be taken into account.

Features and Benefits

Adhesion strength is 4.5N/cm Good high and low temperature resistance Can be easily soldered Easy unwind Breaking load is 40N/cm Provides superior shielding effectiveness Operating temperature ranges between -20°C and 155°C

Applications

Heating and ventilation Construction industry Manufacturing Duct sealing

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Specifications
Attribute Value
Total Thickness 0.07mm
Foil Thickness 0.035mm
Width 10mm
Length 33m
Conductivity Non-Conductive
Adhesion Strength 4.5 N/cm
Adhesive Material Thermosetting Acrylic
Material Plating None
Tensile Strength 40N/cm
Maximum Temperature Resistance +155°C
Minimum Temperature Resistance -20°C
Complies with EN Legislation BS EN 60454 - Part 2
Model Number AT525
113 In stock for delivery within 3 working days
Price Each
HK$ 325.06
(exc. GST)
units
Per unit
1 - 9
HK$325.06
10 - 24
HK$294.94
25 - 49
HK$272.35
50 - 99
HK$254.08
100 +
HK$253.04
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
A variable speed regulator unit is for use ...
Description:
A variable speed regulator unit is for use with electric motors, miniature drill equipment etc. Its very small size which allows it to be easily installed, especially where space limitation is an important factor. Adjustment is by a miniature slotted ...
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range. The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...